Tra cứu nhanh

TRA CỨU NHANH

Điền thông tin sản phẩm bạn muốn tìm vào các ô trống dưới đây:

HƯỚNG DẪN TRA CỨU

CATEGORY: Phân loại danh mục sản phẩm
PRODUCER: Nhà sản xuất
GRADE: Mã hàng

MFI/%VA/K-Value: Thông số kỹ thuật
APPLICATION: Ứng dụng

Full grade

CATEGORY	PRODUCER	GRADE	MFI/%VA/K-Value	APPLICATION
LDPE - Film	Dow	Agility TM 1021	1.9	Protective foams Food Packaging Lamination Films
LDPE - Film	Dow	150E	0.25	Heavy duty shipping sacks Collation shrink films Agricultural films
LDPE - Film	Dow	AGILITY� 2001	0.4	Retail shrink packaging
LDPE - Film	Dow	AGILITY� 1200	0.22	Collation shrink films Agricultural films Industrial bags
LDPE - Film	Dow	621I	2.3	Blow film
LDPE - Film	Dow	6611	0.5-1.5	Blown Film Extrusion
LDPE - Film	Dow	150E	0.25	heavy duty industrial film
LDPE - Film	Dow	352E	2	Light produce bags soft goods packaging textile packaging good optical general purpose bags hygiene films Food packaging films
LDPE - Film	Dow	410E	2	Lamination films Food packaging films Hygiene films cast films air-bubble film Foamed PE Extrustion coating
LDPE - Film	Dow	421E	3.2	High clarity lamination films packaging of solf products such as hand tissues, feminine hygiene products high clarity issues overwrap Produce bags Food packaging films
LDPE - Film	Dow	515E	3.2	Packaging of soft products such as hand tissues, toilet tissues, feminine hygiene products High clarity tissues overwrap
LDPE - Film	Dow	582E	3.5	light produce bags soft goods packaging textile packaging high clarity application
LDPE - Film	Dow	450E	2	Cast film Foam Bubble film General purpose blown film
LDPE - Film	Dow	525E	3.2	high clarity lamination films Label films packaging of soft products such as hand tissues, toilet tissues, feminine hygiene products high clarity tissue overwrap film produce bags food packaging films
LDPE - Film	Dow	545E	0.9	Low density polyethylene resin shrink application
LDPE - Film	Dow	132G	0.25	heavy duty industrial film
LDPE - Film	Dow	535E	0.6	shrink film
LDPE - Film	Dow	330E	0.75	protective film
LDPE - Film	Dow	320E	1	Food packaging, display packaging, lamination film for consumer packaging
LDPE - Film	Dow	310E	0.75	Lamination film, shrink film and stretch film
LDPE - Film	Dow	312E	0.75	Health & hygiene films, food packaging, collation shrink, agricultural films, shopping bags, garbage bags, lamintaion film
LDPE - Film	Dow	410F	2	lamintaion film and clarity over wrap application, cast film
LDPE - Film	Dow	555E	0.3	Shrink films and industrial and consumer blown films
LDPE - Film	Dow	432E	2	Lamintaion films, food packaging films
LDPE - Film	Dow	621I	2.3	Foam and blown film applications
LDPE - Film	Dow	208M	0.7	Films
LDPE - Film	Dow	AGILITY� EC 7030	2	industrial and food packaging applications
LDPE - Film	Dow	SC 7642	2	cast film
LDPE - Film	Dow	133A	0.25	Heavy duty film application, thick gauge film application
LDPE - Film	Dow	503A	1.9	Films
LDPE - Film	Dow	132I	0.25	heavy duty film applications, shrink film, shipping sacks, construction film and other gauge film applications
LDPE - Film	Dow	608A	2.6	thin gauge optical packaging
LDPE - Film	Lyondellbasell	Alathon�L4434	0.34	Bags & Pouches, Food Packaging Film, Lamination Film, Secondary Packaging
LDPE - Film	Lyondellbasell	Alathon�L4550	0.45	Agriculture Film, Bags & Pouches, Nets, Raffia/Tapes/Strapping, Secondary Packaging
LDPE - Film	Lyondellbasell	Alathon�L4904�	0.04	Drinking Water Pipe, Gas Pipe
LDPE - Film	Lyondellbasell	Alathon�L5045	0.45	Bags & Pouches, Food Packaging Film, Lamination Film, Secondary Packaging
LDPE - Film	Lyondellbasell	Alathon L5485	0.85	Bags & Pouches, Food Packaging Film, Lamination Film, Secondary Packaging
LDPE - Film	Lyondellbasell	Alathon�L5645�	0.54	Agriculture Film, Bags & Pouches, Nets, Raffia/Tapes/Strapping, Secondary Packaging
LDPE - Film	Lyondellbasell	Alathon L5845	0.45	Bags & Pouches, Barrier Film, Food Packaging Film, Lamination Film, Nets
LDPE - Film	Lyondellbasell	Alathon�L5885	0.85	Bags & Pouches, Barrier Film, Food Packaging Film, Lamination Film
LDPE - Film	Lyondellbasell	Alathon�M5410	1.15	Bags & Pouches, Barrier Film, Food Packaging Film, Lamination Film
LDPE - Film	ExxonMobil	051.LQ	0.25	heavy duty film application
LDPE - Film	ExxonMobil	71	0.7	Blend partner, construction film, lamination film, co-extrusion film, form fill and seal packaging, medium duty shrink film, collation shrink, freezer film, pallet shrink film
LDPE - Film	ExxonMobil	100.BW	2	Blend partner, cast film, compounding, foams, form fill and seal packaging, freezer film, lamination film, light duty shrink film, liner, mail bag, produce bags, shoppers, textile packaging, tough medium sized molding
LDPE - Film	ExxonMobil	102.LC	6.8	Blow film, cast film, compounding, garment film, laundry film
LDPE - Film	ExxonMobil	103	1.1	Agricultural film, blend partner, co-extrusion films, form fill and seal packaging, freezer film, liner, medium duty shrink film, rubber bale wrap
LDPE - Film	ExxonMobil	105	2	Blend partner, bread bags, display packaging film, food packaging, form fill and seal packaging, freezer film, high clarity film, high quality lamination, laminatin film, laudry film, light duty shrink film, produce bags, salad bags, textile packaging
LDPE - Film	ExxonMobil	107.BR	2	Blend partner, bread bags, display packaging film, food packaging, form fill and seal packaging, freezer film, high clarity film, high quality lamination, laminatin film, laudry film, light duty shrink film, produce bags, salad bags, textile packaging
LDPE - Film	ExxonMobil	117	1.6	Bread bags, co-extrusion films, collation shrink, diaper backsheet, foams, high performance collation shrink, hygiene packaging, label film, laminatin film, overwrap film, paper overwrap
LDPE - Film	ExxonMobil	123	2.4	Blend partner, bread bags, food packaging, form fill and seal packaging, freezer film, high clarity film, high quality lamination, lamination film, light duty shrink film, produce bags, textile packaging
LDPE - Film	ExxonMobil	129	2.3	Bread bags, cast film, co-extrusion films, diaper backsheet, embossed film, hygiene packaging, label film, overwrap film, paper overwrap
LDPE - Film	ExxonMobil	136.MN	2	Blend partner, food packaging, form fill and seal packaging, produce bags, textile packaging
LDPE - Film	ExxonMobil	143	2.1	Blend partner, food packaging, form fill and seal packaging, high clarity film, lamination film, light duty shrink film, produce bags, textile packaging
LDPE - Film	ExxonMobil	165.BW1	0.33	Agricultural film, blend partner, construction film, foams, heavy duty bags, high performance collation shrink, pallet shrink film, profile extrusion
LDPE - Film	ExxonMobil	302	1.3	Co-extrusion flms, foams, form filll and seal packaging, freezer film, lamination film, poultry bag, produce bags
LDPE - Film	ExxonMobil	306	2	Co-extrusion flms, foams, form filll and seal packaging, freezer film, lamination film, poultry bag, produce bags, rice bags, high clarity film
LDPE - Film	ExxonMobil	312	1	Co-extrusion flms, foams, form filll and seal packaging, freezer film, lamination film, poultry bag, produce bags, rice bags
LDPE - Film	ExxonMobil	313.NF	2.5	Carpet backing, co-extrusion films, foams, form fill and seal packaging, freezer film, high clarity film, lamination film
LDPE - Film	ExxonMobil	317	0.3	Agricultural film,batch inclusion bags, co-extrusion films, construction film, form fill and seal packaging, freezer film, heavy duty bags, Ice bags, poultry bag, produce bag, profile extrusion
LDPE - Film	ExxonMobil	319	2	meat packaging, primal meat bags
LDPE - Film	ExxonMobil	331	2	Co-extrusion flms, foams, form filll and seal packaging, freezer film, lamination film, poultry bag, produce bags, rice bags, high clarity film
LDPE - Film	ExxonMobil	LGA 105	6.5	Blown film, cast film, compounding garment films, hygiene film, laudry film
LDPE - Film	Chevron Phillips	7120B	2	Coextrusions � Blend component to improve drawdown � Thin gauge applications � General purpose packaging
LDPE - Film	Chevron Phillips	7120X	2	Coextrusions � Blend component to improve drawdown � Thin gauge applications � General purpose packaging
LDPE - Film	Chevron Phillips	TR-130	0.3	� Retail bags � Industrial liners � Mailer bags � Blend component
LDPE - Film	Chevron Phillips	7109FJ	0.9	Industrial liners � Garment bags � Mailer bags � General purpose packaging
LDPE - Film	Chevron Phillips	9656	0.75	Notion and millinery bags � Multi-wall liners � Coextrusions � Overwraps
LDPE - Film	Chevron Phillips	4571	4.1	� Personal care � General purpose
LDPE - Film	Chevron Phillips	5754	0.8	Produce bags � Frozen food packaging � Case shrink wrap, bundling � Dry goods packaging � Laminations � General purpose clarity packaging
LDPE - Film	Chevron Phillips	5628	0.4	Heavy duty packaging � Pallet shrink � Case shrink wrap � C&A film and container liners
LDPE - Film	Chevron Phillips	5619	0.4	� Heavy duty packaging � Pallet shrink � Case shrink wrap � C&A film and container liners
LDPE - Film	Chevron Phillips	5613	0.5	Heavy duty packaging � Pallet shrink � Case shrink wrap � C&A film and container liners
LDPE - Film	Chevron Phillips	5563	1.3	Laminations � Bakery film � Case shrink wrap � Produce and hardware packaging
LDPE - Film	Chevron Phillips	5561	1.3	� Laminations � Bakery film � Case shrink wrap � Produce and hardware packaging
LDPE - Film	Chevron Phillips	5440	2.2	Coextruded film � General purpose packaging
LDPE - Film	Chevron Phillips	5430	2.2	Overwrap � Coextruded film � General purpose packaging
LDPE - Film	Chevron Phillips	5429	2.2	Convertor film � General purpose packaging
LDPE - Film	Chevron Phillips	5428	2.2	Bakery film � General purpose packaging
LDPE - Film	Chevron Phillips	5755	0.8	Produce bags � Frozen food packaging � Dry goods packaging � Case shrink wrap, bundling � Laminations � General purpose clarity packaging
LDPE - Film	Chevron Phillips	1122	2.1	Liners � Trash bags � Masking films
LDPE - Film	Chevron Phillips	4538A	2	Wood-plastic composite component ? Blends to improve friction values ? Blends to enhance part flexibility ? Adhesives
LDPE - Film	Chevron Phillips	5104	1.3	Pharmaceutical bottles ? Squeeze bottles ? Flexible toys
LDPE - Film	Chevron Phillips	5335	2	Institutional packaging � Food packaging � Converter films
LDPE - Film	Formosa	FR2233C	0.33	Agricultural film, Construction film, Blend partner, Heavy duty bags, Pallet shrink film, High performance Collation shrink, Foams, Profile extrusion.
LDPE - Film	Formosa	FR2955	0.55	Blend partner, Co-extrusion films, Medium duty shrink film, lamination.
LDPE - Film	Formosa	FR2375C	0.75	Agricultural film, Blend partner, Collation shrink, Freezer film, Medium duty shrink film, Co-extrusion films, Lamination film, Shoppers, Form Fill & Seal packaging.
LDPE - Film	Formosa	FR2375D	0.75	Agricultural film, Blend partner, Collation shrink, Freezer film, Medium duty shrink film, Co-extrusion films, Lamination film, Shoppers, Form Fill & Seal packaging.
LDPE - Film	Formosa	FL2202C	2	Blend partner, Cast film, Food packaging, Foams, Liners, Light duty shrink, Freezer film, Lamination film, Compounding, Form Fill & Seal packaging, Mail bags, Produce bags, Shoppers, Textile packaging.
LDPE - Film	Formosa	FL2202A	2	Blend partner, Cast film, Food packaging, Foams, Liners, Light duty shrink, Freezer film, Lamination film, Compounding, Form Fill & Seal packaging, Mail bags, Produce bags, Shoppers, Textile packaging.
LDPE - Film	Formosa	FC2502A	2	Blend partner, Bread bags, Food packaging, Display packaging, High Clarity film, Freezer film, Light duty shrink film, Form fill & Seal packaging, Lamination film, Produce bags, Salad bags, Textile packaging.
LDPE - Film	Formosa	FC3403C	3	Cast film, Co-extrusion films, Embossed films, Hygiene packaging, Label film, Overwrap film, Paper Overwrap.
LDPE - Film	Formosa	FC2304E	4	Cast film, High clarity film, Laundry film, Produce bags, Zipper bag, Profile Extrusion.
LDPE - Film	Ineos	21D430	0.25	heavy duty film applications such as sacks, pallet shrink wrap and agricultural film
LDPE - Film	Ineos	21H460	1.5	general-purpose packaging films, liners, carrier bags and fine shrink film.
LDPE - Film	Ineos	22D730	0.3	Heavy duty bags � Shrink films � Liners � Construction and agricultural films
LDPE - Film	Ineos	22G564	1.2	Carrier-bag films � Pouches refuse sacks � General packaging film
LDPE - Film	Ineos	22G764	1.2	Thin shrink film � Carrier-bag films � Pouches and refuse sacks � General packaging film
LDPE - Film	Ineos	22H594	2.1	Thin shrink film � General packaging film
LDPE - Film	Ineos	23H430	2	general-purpose packaging films, liners, carrier bags and fine shrink film.
LDPE - Film	Ineos	M21E730	0.5	collation shrink film, envelopes, overwrap and bags
LDPE - Film	Ineos	M21G764	0.95	deep freeze, form fill seal film in general and thin bags
LDPE - Film	Sabic	2102N0W	2.5	general purpose film applications and for lamination film
LDPE - Film	Sabic	�2102N3W	2.5	packaging films for food and industrial goods and for lamination films
LDPE - Film	Sabic	2201H0W	0.85	hin packaging film purposes
LDPE - Film	Sabic	LDPE 2201H1	0.85	lamination films, high quality carrier bags and high quality packaging films.
LDPE - Film	Sabic	2201H3W	0.85	thin packaging film purposes
LDPE - Film	Sabic	2402H0�	2	thin film applications where enhanced stiffness is required, such as thin shrink films, food packaging films, bags and pouches.
LDPE - Film	Sabic	2404N0	4.2	cast film extrusion applications
LDPE - Film	Sabic	2501N0	0.75	diaper film, surface protection film, lamination film and in applications�
LDPE - Film	Sabic	HP0322N	0.33	heavy-duty films�
LDPE - Film	Sabic	HP0323NN	0.3	heavy-duty films�
LDPE - Film	Sabic	HP0722NN	0.75	�medium duty films
LDPE - Film	Sabic	HP4024N	4	general-purpose films�
LDPE - Film	Westlake	EF796	2.5	Disposable diaper film ? Food contact applications ? Industrial packaging
LDPE - Film	Westlake	EF923	2.5	Bread bags ? Food packaging / food contact applications ? Produce bags ? Industrial packaging
LDPE - Film	Westlake	EF403	0.8	Medium duty produce bags ? Clarity shrink film ? Textile bags ? Beverage / bottle overwrap
LDPE - Film	Westlake	EF412	2	General purpose clarity packaging ? Medium duty produce bags ? Bakery bags ? Bags for textile films
LDPE - Film	Westlake	EF601	0.25	? Heavy duty bags ? Heavy duty shipping sacks ? Industrial shrink film ? Heavy duty C&A sheeting
LDPE - Film	Westlake	EF602	0.6	Heavy duty refuse bags & liners ? Industrial shrink film ? Bundling and case-wrap
LDPE - Film	Westlake	EF603	1.2	Heavy duty refuse bags & liners ? Medium duty shrink film ? Bundling film
LDPE - Film	Westlake	EF606	2.2	Trash bags ? General purpose liners ? Multiwall liners ? Industrial liners
LDPE - Film	Westlake	EF1807	0.7	Shrink film ? Frozen food packaging
LDPE - Film	Westlake	EF601	0.25	Heavy duty bags ? Heavy duty shipping sacks ? Industrial shrink film ? Heavy duty C&A sheeting
LDPE - Film	Westlake	EP413	3	General purpose clarity ? Medium duty produce bags ? Bakery bags ? Bags for textile items
LDPE - Film	Westlake	EF600	0.18	Heavy duty bags ? Heavy duty shipping sacks ? Industrial shrink film ? Heavy duty C&A sheeting
LDPE - Film	Westlake	EG417	2	Blown film with increased stiffness
LDPE - Film	Westlake	EF612	2.5	Clarity films
LDPE - Blow molding	Lyondellbasell	Alathon L5440	0.35	Bottles For Consumer Goods, Bottles for Industrial Use
LDPE - Blow molding	Lyondellbasell	Alathon L5840	0.35	Bottles For Consumer Goods
LDPE - Blow molding	Lyondellbasell	Alathon�L5876	0.74	Bottles For Consumer Goods
LDPE - Blow molding	Lyondellbasell	Histif�5431 Z	2.6	Drums, Industrial Packaging
LDPE - Blow molding	Exxon Mobil	521.LN Blown	2.1	blend partner, foams, protective packaging
LDPE - Blow molding	Ineos	PH23H630	2	the production of ampoules and bottles.
LDPE - Blow molding	Ineos	PH27D630	0.3	production ampoules and bottles
LDPE - Injection molding	Dow	692 HEALTH+�	0.7	Medical packaging Injection and blow molding Medical packaging Film
LDPE - Injection molding	Dow	6611	0.75	Extrusion blow molding injection blow molding, and blow-fill seal applications with good flexibility, moderate rigidity and good chemical resistance
LDPE - Injection molding	Dow	780E	20	Housewares Toys & leisures containers compounding
LDPE - Injection molding	Dow	PG7008	7.7	Housewares Toys Containers Caps
LDPE - Injection molding	Dow	7004	4.1	Housewares Toys Containers Lids Caps
LDPE - Injection molding	Dow	690 HEALTH+�	2	extrusion blow molding, injection blow molding, and blow-fill seal applications, medical packaging films
LDPE - Injection molding	Dow	959S	55	lids
LDPE - Injection molding	Dow	993I	25	toys, lids and closures
LDPE - Injection molding	Dow	955I	35	lids, caps / closures, general purpose
LDPE - Injection molding	Lyondellbasell	Lupolen 1800H	1.5	bottles for cosumer goods, caps & closures, sports, leisure & toys
LDPE - Injection molding	Lyondellbasell	Lupolen�1800P	15	Caps & Closures, Sports, Leisure & Toys
LDPE - Injection molding	Lyondellbasell	Lupolen�1800S	20	Caps & Closures, Sports, Leisure & Toys
LDPE - Injection molding	Lyondellbasell	Lupolen�1800U	65	Caps & Closures, Colour Concentrates, Housewares, Sports, Leisure & Toys
LDPE - Injection molding	Lyondellbasell	Alathon�H4250	50	TWIM Food Containers
LDPE - Injection molding	Lyondellbasell	Alathon�H4837	40	TWIM Food Containers
LDPE - Injection molding	Lyondellbasell	Alathon�H5057	57	TWIM Food Containers
LDPE - Injection molding	Lyondellbasell	Alathon�H5112	12	Caps & Closures, Containers, Housewares, Sports, Leisure & Toys
LDPE - Injection molding	Lyondellbasell	Alathon�H5220	20	Caps & Closures, Containers, Housewares
LDPE - Injection molding	Lyondellbasell	Alathon�H5234	34	Housewares, TWIM Food Containers
LDPE - Injection molding	Lyondellbasell	Alathon�H5275	75	Housewares, Lids, TWIM Food Containers
LDPE - Injection molding	Lyondellbasell	Alathon�H5520	20	Caps & Closures, Containers, Housewares
LDPE - Injection molding	Lyondellbasell	Alathon�H5618	18	Caps & Closures, Containers, Housewares
LDPE - Injection molding	Lyondellbasell	Alathon�H6017	18	Containers, Lids, Overcaps
LDPE - Injection molding	Lyondellbasell	Alathon�H6030	30	Containers, Lids, Overcaps
LDPE - Injection molding	Lyondellbasell	Alathon�M4612�	1.2	Containers, Tube Headers
LDPE - Injection molding	Lyondellbasell	Alathon�M4661	6.1	Industrial Seating
LDPE - Injection molding	Lyondellbasell	Alathon�M4855	5.5	Industrial, Refuse Carts
LDPE - Injection molding	Lyondellbasell	Alathon�M5040	4	Containers
LDPE - Injection molding	Lyondellbasell	Alathon�M5265	6.5	Containers, Pails
LDPE - Injection molding	Lyondellbasell	Alathon�M5350	4.5	Containers, Pails
LDPE - Injection molding	Lyondellbasell	Alathon�M5352	4.5	Containers, Pails
LDPE - Injection molding	Lyondellbasell	Alathon�M5562	6	Aerosol Valve Components
LDPE - Injection molding	Lyondellbasell	Alathon�M6580	8.2	Crates, Pallets/Trays/Tote Bins
LDPE - Injection molding	Lyondellbasell	Hostalen 5231H	2	Caps & Closures, Collapsible Tubes
LDPE - Injection molding	Lyondellbasell	Hostalen�ACP 5331 A	6.5	Drums, Industrial Packaging, Jerry Cans
LDPE - Injection molding	Lyondellbasell	Hostalen�GM9350C�BLACK	3	Fuel Tanks
LDPE - Injection molding	Exxon Mobil	503.LP	2.3	Foams, injection molding
LDPE - Injection molding	Exxon Mobil	506.07	33	Caps, closures, compounding, food packaging containers, houseware articles, injection molding, masterbatch base resin
LDPE - Injection molding	Exxon Mobil	516.LN	9.5	Caps, closures, compounding, food packaging containers, houseware articles, injection molding, masterbatch base resin
LDPE - Injection molding	Exxon Mobil	521.LN	2.1	foams, injection molding
LDPE - Injection molding	Exxon Mobil	617.LN	26	Caps, closures, compounding, food packaging containers, houseware articles, injection molding, masterbatch base resin, labware
LDPE - Injection molding	Chevron Phillips	1409	50	Lids and overcaps for dry and oil-free products ? Masterbatch base resin
LDPE - Injection molding	Chevron Phillips	1007	7	Housewares � Tamper evident, snap-on caps � Wine bottle sleeve caps
LDPE - Injection molding	Chevron Phillips	1009	16	Large housewares � Tamper evident, snap-on caps � Feminine hygiene applications
LDPE - Injection molding	Chevron Phillips	1122B	2.1	Healthcare product closures � Charcoal lighter fluid closures � Champagne bottle stoppers
LDPE - Injection molding	Chevron Phillips	1412	35	Lids and overcaps with multi-level molds
LDPE - Injection molding	Chevron Phillips	KN226	25	Housewares � Personal care products � Luggage handles
LDPE - Injection molding	Chevron Phillips	19N930	7.5	products like caps and closures household goods and toys
LDPE - Injection molding	Chevron Phillips	20N430	8.5	caps and closures, food containers, soft tubes, technical parts)
LDPE - Injection molding	Chevron Phillips	20T930	20	caps and closures, household goods and toys.
LDPE - Injection molding	Ineos	23L430	4.5	paper, board and aluminium can be used for packaging food and liquids, powders, medical devices, agricultural materials, chemicals and many other products.
LDPE - Injection molding	Ineos	23T930	22	caps and closures, household goods and toys
LDPE - Injection molding	Ineos	24W930	55	caps and closures, household goods and toys.
LDPE - Injection molding	Ineos	BPD2000	2	For insulation of cables of higher voltage
LDPE - Injection molding	Ineos	PH19N630	7.5	extrusion coating - primary and secondary packaging - press-fit stoppers - caps, closures - injected tubes
LDPE - Injection molding	Ineos	PH22D630	0.3	production ampoules and bottles.
LDPE - Injection molding	Ineos	PH23T630	22	Flexible lids � Caps and closures � Pharmaceutical & diagnostic packaging
LDPE - Coating	Dow	AGILITY� EC 7000	3.9	Protective packaging for consumer goods (ream wrap, reel wrap�) Liquid cartons for fresh and long shelf-life milk Paper/plastic/board based laminates for food Personal care and beverage packaging Hygiene films Foams for protective packaging Polymer compounding Industrial sacks
LDPE - Coating	Dow	7007	7.5	Paper Board and foil coatings for packaging Food and non-food
LDPE - Coating	Dow	PG 7004	4.1	Paper board Foll coatings for packaging food and non-food
LDPE - Coating	Dow	4016	16	Condiment packaging, dry foods packaging, snack foods packaging, moist foods packaging, sugar pouches, lidding stock and medical packaging
LDPE - Coating	Dow	PG 7008	7.7	paper, board and foil coatings for packaging, food and non-food
LDPE - Coating	Dow	7010E	8.5	high speed extrustion coating resin
LDPE - Coating	Dow	203M	0.3	Film
LDPE - Coating	Dow	206M	0.7	Film
LDPE - Coating	Dow	207M	0.7	Film
LDPE - Coating	Dow	219M	2	film
LDPE - Coating	Dow	220M	2	Film
LDPE - Coating	Dow	4010	10	general purpose extrusion coating
LDPE - Coating	Dow	722	8	caps / closures
LDPE - Coating	Dow	5004I	4.2	fresh milk cartons, liquid / juice containers, dry foods packaging, snack foods packagin
LDPE - Coating	Dow	4012	12	Condiment packaging, dry foods packaging, snack foods packaging, moist foods packaging, sugar pouches, lidding stock and medical packaging
LDPE - Coating	Dow	5005	5.7	fresh milk cartons, liquid / juice containers, dry foods packaging, snack foods packagin
LDPE - Coating	Dow	751A	6.4	general packaging application, cast film extrusion
LDPE - Coating	Lyondellbasell	Lucalen�A2910M	7	Coatings, Protective, Pipe Coating
LDPE - Coating	Lyondellbasell	Alathon H6012	12	Bags & Pouches, Barrier Film, Food Packaging Film, Lamination Film, Sealants, Specialty Film
LDPE - Coating	Lyondellbasell	Alathon�H6018	18	Bags & Pouches, Barrier Film, Food Packaging Film, Lamination Film, Sealants, Specialty Film
LDPE - Coating	SCG	D388C	8	For general use in extrusion lamination and extrusion coating For coating on different substrates; Aluminium foil, Nylon, PET, OPP, Paper etc Food and non-food packaging
LDPE - Coating	SCG	D477C	4	For general use in extrusion lamination and extrusion coating For coating on different substrates; Aluminium foil, Nylon, PET, OPP, Paper etc Food and non-food packaging
LDPE - Coating	SCG	D777C	7	For general use in extrusion lamination and extrusion coating For coating on different substrates; Aluminium foil, Nylon, PET, OPP, Paper etc Food and non-food packaging
LDPE - Coating	Exxon Mobil	200.48	7.5	Coextrusion coating, extrusion coating, extrusion lamination, food packaging, low neck in, low, line speed coatings, photographic paper
LDPE - Coating	Exxon Mobil	201.48	4.2	Coextrusion coating, extrusion coating, extrusion lamination, foams, food packaging, industrial packaging, liquid packaging
LDPE - Coating	Exxon Mobil	202.48	12	coextrusion coating, demanding heat seals, document plastification, extrusion coating, extrusion lamination, food packaging, high speed, thin weight coatings, non - woven coating, thermal lamination
LDPE - Coating	Chevron Phillips	1013	13	Food packaging � Laminations � General paper and board coa
LDPE - Coating	Chevron Phillips	1017	7	Laminations � Sealant resin � General paper and board coating � General flexible packaging
LDPE - Coating	Chevron Phillips	1018	8	Laminations � Sealant resin � General paper and board coating � General flexible packaging
LDPE - Coating	Chevron Phillips	1019	16	Food packaging � Laminations � Sealant resin � General paper and board coating
LDPE - Coating	Chevron Phillips	4517	5.1	� Liquid packaging � Cup stock � Folding carton � General paper and board coating
LDPE - Coating	Ineos	17L430	4	extrusion coating and laminating grade
LDPE - Coating	Ineos	18R430	15	Extrusion coating and laminating grade designed for a medium to high coating line speed
LDPE - Coating	Ineos	19N430	7.5	Extrusion coating and laminating grade designed for a medium to high coating line speed
LDPE - Coating	Sabic	2005EC	5	liquid packaging, food packaging and building & construction.
LDPE - Coating	Sabic	2404EC	3.5	used in extrusion coating and lamination applications, such as liquid packaging, imaging, food packaging, release liners and building & construction.
HDPE - Film	SCG	F15	0.06	Produce: Shopping bag and T-shirt bag, Garbage bag, Liner bag
HDPE - Film	SCG	H5604F	-	Shopping bag and T-shirt bag, garbage bag, liner bag
HDPE - Film	Hanwha total	Y910A	0.9	Conventional extrusion stretchingequipment
HDPE - Film	Hanwha total	F920A	1	Be processed in conventional LLDPE blown film equipment
HDPE - Film	PTT	HD6000F	0.16	General purpose bags, Shopping bags, Liner films, Bags on roll, Garbage bags, Industrial films
HDPE - Film	PTT	HD7000F	0.04	General purpose bags, Shopping bags, Liner films, Bags on roll, Garbage bags, Industrial films
HDPE - Film	PTT	HD8000F	0.03	General purpose bags, Shopping bags, Liner films, Bags on roll, Garbage bags, Industrial films
HDPE - Film	PTT	HD3355F	1.1	Laminated films, Laminated tubes, General purpose films
HDPE - Film	JG Summit	HF09522	0.952	Grocery bags, Supermarket produce bags, Carrier bags, Trash bags, Sack liners
HDPE - Film	JG Summit	HF1452	0.952	Grocery bags, Supermarket produce bags, Carrier bags, Trash bags, Sack liners
HDPE - Film	Chevron Phillips	Marlex 9656	0.75	Industrial Packaging
HDPE - Film	Chevron Phillips	Marlex 9659	1	Food Packaging, Retail Packaging
HDPE - Film	Chevron Phillips	Marlex TRB-115	0.06	Retail Packaging
HDPE - Film	Formosa	E922	0.15	Film; Shopping bags; Trash can liners; Thin film for laminate Applications
HDPE - Film	Formosa	E924	0.04	T-Shirt bags; Multi-Wall Bag liners; Trash can liners & heavay duty bags; Merchandise bags
HDPE - Film	Formosa	E924F	0.04	T-Shirt bags; Multi-Wall Bag liners; Trash can liners & heavay duty bags; Merchandise bags
HDPE - Film	Formosa	E924ND	0.04	T-Shirt bags; Multi-Wall Bag liners; Trash can liners & heavay duty bags; Merchandise bags
HDPE - Film	Formosa	E927	0.07	T-Shirt bags; Multi-Wall Bag liners; Trash can liners & heavay duty bags; Merchandise bags
HDPE - Film	Formosa	E927ND	0.07	T-Shirt bags; Multi-Wall Bag liners; Trash can liners & heavay duty bags; Merchandise bags
HDPE - Film	Formosa	HF3728	0.3	Trash can liners; Produce; Merchandise
HDPE - Film	Formosa	HL3721	21	Landfill Liners; Gasoline and Chemical Tank Containment Liners; Tunnel Moisture; Mine Tailing Collection Projects
LLDPE - Molding	SCG	M10	4	Water storage tanks, small to medium tanks (<5,000L), Material handling equipment, Intermediate bulk containers (IBC)
LLDPE - Molding	SCG	M1A	4	inner layers of water storage tanks, hygienic parts
LLDPE - Molding	SCG	M30 / M40	4	cooler boxes, portable containers, material handling containers, general purpose moulding, fish bins
LLDPE - Molding	SCG	M3204RU	4	Cooler boxes, Portable containers, Material handling containers, General purpose moulding, Fish bins, Small thin tanks (less than 1000 liters)
LLDPE - Molding	Lyondellbasell	NE542013	13	wire & cable; wood composites
LLDPE - Molding	Lyondellbasell	3621	7.5	Crates; Heavy Duty Packaging; Industrial; Industrial Packaging; Intermediate Bulk Containers; Tanks, Industrial
LLDPE - Molding	Lyondellbasell	MP625962	5	Toys, playground equipment, drums and agricultural and chemical storage containers
LLDPE - Molding	Lyondellbasell	MP635962	6.7	containers, drums, sports, leisure & toys
LLDPE - Molding	Lyondellbasell	MP643962	3.6	containers, drums, intermediate bulk containers, jerry cans, sports, leisure & toys
LLDPE - Molding	Lyondellbasell	GA625962	5	containers, drums, sports, leisure & toys
LLDPE - Molding	Sabic	324CE	1.6	Telecommunication and Power cable (LV, MV, HV) jacketing. - Halogen-free flame retardant (HFFR) compounds. - One-step or two-steps silane crosslinkable for cable insulation.
LLDPE - Molding	Sabic	324CNJ	3.6	One-step or two-step Silane cross-linkable insulation for Low Voltage power insulation cable, Aerial bundle cable and suitable for telecommunication and Low Voltage power cable jacketing.
LLDPE - Molding	Sabic	RG50035	5	Rotational molding of water tanks, industrial and agricultural tanks and containers
LLDPE - Molding	Sabic	R50035EE	5	rotational moulding of large industrial and agricultural tanks, trash containers and chemical shipping drums
LLDPE - Molding	Ineos (Eltex)	LL2635UA	3.3	Rotational moulded items with good flexibility
LLDPE - Molding	sasol	HR3935U	3.5	Rotomoulded rigid parts for indoor or outdoor use
LLDPE - Molding	sasol	HR3950U	5	Rotomoulded rigid parts for indoor or outdoor use
LLDPE - Molding	Reliance	R35042	4.2	Overhead water tank, loft tank
LLDPE - Molding	Reliance	JLL36RA045 JLL36RA045UV	4.5	Overhead Water Tank, Storage Tank for Agriculture, Loft Tank, Litter Bin, Toy items, Road Blocks etc
LLDPE - Molding	Lotte	UR744	6	ROTO molding(Storage container)
LLDPE - Molding	Lotte	UR654	3.2	ROTO molding(Storage container)
LLDPE - Molding	Lotte	UR644	5	ROTO molding(Storage container)
LLDPE - Molding	Lotte	UR534	3.5	ROTO molding(Storage container)
LLDPE - Molding	Chandra asri	UR3840V	4	Water and chemical tank, cool boxes, and traffic cones
LLDPE - Molding	GC Innoplus	LL9630U	3.2	Rotational Molding grade for outdoor storage containers, Water & Chemical tanks, Toys & Playground equipments
LLDPE - Molding	GC Innoplus	LL9640U	4	Rotational Molding grade for outdoor storage containers, Water & Chemical tanks, Toys & Playground equipments
LLDPE - Molding	GC Innoplus	LL9641U	4	Rotational Molding grade for outdoor storage containers, Water & Chemical tanks, Toys & Playground equipments
LLDPE - Molding	GC Innoplus	LL9450U	5	Rotational Molding grade for outdoor storage containers, Water & Chemical tanks, Toys & Playground equipments
LLDPE - Molding	GC Innoplus	LL9470U	7	This grade is UV8 which can be used to produce a general molding in mild using condition and recommended for complex mold and required high quality product surface
LLDPE - Molding	Hanwha	9730	15	Tarpaulin
LLDPE - Coating	Reliance	E24065	6.5	Extrusion coating on HDPE woven fabric, Jute, Al foil etc.
LLDPE - Coating	Lotte	U8835H	16	Tarpaulin Extrusion Coating
LLDPE - Coating	Lotte	UC404	2.8	Wire and cable coating, Compounding, Hot melt adhesives
LLDPE - Injection	Sabic	M200024	20	Housewares, trash cans, automotive parts, lids and large industrial containers.
LLDPE - Injection	Dow	DNDA-1081 NT7	130	injection molding of thin-walled parts such as downgauged lids
LLDPE - Injection	Dow	DNDA-1082 NT7	160	injection molding of thin-walled parts such as downgauged lids
LLDPE - Injection	Dow	DNDA-7144	20	Injection molding, large industrial containers and trash cans.
LLDPE - Injection	Dow	DNDA-8320	20	injection molding, general purpose applications
LLDPE - Injection	Dow	DNDA-8335	35	General purpose injection modling applications
LLDPE - Injection	Dow	DNDB-1077	100	Injection molding applications, lids
LLDPE - Injection	Dow	DNDB-7147	50	food containers, housewares and lids
LLDPE - Injection	Dow	DNDA - 1055	85	injection molding oof thin-walled parts such as lids.
LLDPE - Injection	Dow	DNDA-1088	180	injection molding, lids
LLDPE - Injection	Lyondellbasel	MP564189	20	trash cans, industrial containers, housewares and toys
LLDPE - Injection	Lyondellbasel	MP574189	50	lids, closures, containers, housewares and medical items
LLDPE - Injection	Lyondellbasel	GA564189	20	housewares, outdoor and power tools, sports, leisure & toys, trash cans, wire & cable
LLDPE - Injection	Lyondellbasel	GA568200	33	housewares, industrial packaging, outdoor and power tools, sports, leisure & toys, trash cans
LLDPE - Injection	Lyondellbasel	GA578189	85	caps & closures, containers, housewares, lids, outdoor and power tools
LLDPE - Injection	Lyondellbasel	GA584189	105	lids
LLDPE - Injection	Lyondellbasel	GA594189	140	lids
LLDPE - Injection	Lyondellbasel	GA625189	5	caps & closures
LLDPE - Injection	Lyondellbasel	GA694189	160	lids
LLDPE - Injection	Sabic	M13024T	13	Housewares, trash cans, lids for large industrial containers, automotive parts. masterbatch/compounding.
LLDPE - Injection	Sabic	M300024	30	housewares, trash cans, automotive parts, lids and large industrial containers.
LLDPE - Injection	Sabic	M500026	50	Lids for closures and containers and deep draw houseware products, automotive parts.
LLDPE - Injection	Sabic	M50022T	5	Housewares, trash cans, lids for large industrial containers, automotive parts, masterbatch/compounding.
LLDPE - Injection	Sabic	MG200024	20	injection moulding and film extrusion applications
LLDPE - Injection	Sabic	MG500026	50	carpet backing, metal coating and compounding for masterbatch production.
LLDPE - Injection	Ineos	BPD3642	3	jacketing of cables, especially power cables.
LLDPE - Injection	Ineos	BPD3669	3.3	jacketing of cables, especially power cables.
LLDPE - Injection	Sasol	HM2420	20	Containers and closures Masterbatch base
LLDPE - Injection	Sasol	HR3935	3.5	Rotomoulded rigid parts for indoor or outdoor use
LLDPE - Injection	Sasol	HR3950	5	Rotomoulded rigid parts for indoor or outdoor use
LLDPE - Injection	Reliance	M24200	20	Masterbatches, Shopping baskets, Housewares, Lids
LLDPE - Injection	Reliance	M24300	30	Masterbatches, shopping baskets, lids
LLDPE - Injection	Reliance	M26500	50	Masterbatches, shopping basket, lids, hot melt adhesive, powder coating
LLDPE - Injection	Reliance	O18030	3	Cast Co ex Films, Cast Stretch & Cling Films, Hygiene Films, Personal Care, General Purpose packaging
LLDPE - Injection	Reliance	R19010	1.05	General purpose application like bending for IM, Drip lateral and thick extruded products
LLDPE - Injection	Reliance	JM26500	50	Master batches,shopping baskets, lids, hot melt adhesives, powder coating
LLDPE - Injection	Reliance	JM24200	20	Master batches, Shopping baskets, Lids
LLDPE - Injection	Lotte	UJ900	22	Housewares, Closures for containers
LLDPE - Injection	Lotte	UL814	20	Housewares, Closures for containers
LLDPE - Injection	Lotte	UL614	10	Housewares, Closures for containers, Tarpaulin Extrusion Coating
LLDPE - Injection	Lotte	UL714	16	Housewares, Closures for containers, Tarpaulin Extrusion Coating
LLDPE - Injection	Chandra Asri	UI2650	50	Houseware, lid, bottle closure, masterbatch, powder coating, and toy
LLDPE - Injection	Chandra Asri	UI2420	20	Houseware, lid, bottle�closures, toys
LLDPE - Injection	GC Innoplus	LL8420A	20	Injection Molding grade for general purpose applications; Lids, Housewares, Trash bins, Masterbatch carrier
LLDPE - Injection	Hanwha	7635	20	Fender liner, mud guard
LLDPE - Film	Dow	MP 1888.11	1.6	Blown film applications
LLDPE - Film	Dow	1648	3.5	Cast stretch film, industrial pallet wrap
LLDPE - Film	Dow	1630	3	Industrial applications and consumer packaging
LLDPE - Film	Dow	1613 series	1.3	films, industrial appkiactions and consumer packaging.
LLDPE - Film	Dow	1630T	2.8	films for industrial applications and consumer packaging
LLDPE - Film	Dow	7047	1	Blown film applications
LLDPE - Film	Dow	7059 NT7	2	slot cast thin film, coextruded, lot cast stretch wrap, hose
LLDPE - Film	Dow	DFDC-7080	1	Blown film applications
LLDPE - Film	Dow	DFDC-7087	1	Blown film applications
LLDPE - Film	Lyondellbasell	HYPE 35P FA	0.75	Food packaging film, heavy duty packaging, products for use in property modification
LLDPE - Film	Lyondellbasell	hyPE 36R FA	2.5	Filament Yarn; Film Wrap; Food Packaging Film; Lamination Film; Nets; Stretch Wrap Film
LLDPE - Film	Lyondellbasell	GA501020	1	Agriculture film, bags & pouches, can liners, film wrap, food packaging film, heavy duty packaging, lamination film, liner film, retail carryout bags, shrink film.
LLDPE - Film	Lyondellbasell	GA502024	2	Bags & pouches, can liners, colour concentrate; film wrap, food packaging film, lamination film, liner, stretch wrap film
LLDPE - Film	Lyondellbasell	GA502119	2	Bags & pouches, can liners, colour concentrates, film wrap, food packaging film, lamination film, liner film, stretch wrap film
LLDPE - Film	Lyondellbasell	GA503027	3.5	Bags & pouches, film wrap, food packaging film, lamination film, zipper packaging.
LLDPE - Film	Lyondellbasell	GA503028	3.5	Bags & pouches, film wrap, food packaging film, lamination film, zipper packaging.
LLDPE - Film	Lyondellbasell	GA601030	1	Agriculture film, bags & pouches, can liners, film wrap, food packaging film, heavy duty packaging, lamination film, liner film, retail carryout bags, shrink film.
LLDPE - Film	Lyondellbasell	GA601031	1	Agriculture film, bags & pouches, can liners, film wrap, food packaging film, heavy duty packaging, lamination film, liner film, retail carryout bags, shrink film.
LLDPE - Film	Lyondellbasell	GA601032	1	Agriculture film, bags & pouches, can liners, film wrap, food packaging film, heavy duty packaging, lamination film, liner film, retail carryout bags, shrink film.
LLDPE - Film	Lyondellbasell	GA623119	2	Bags & pouches, can liners, clarity film, film wrap, food packaging film, lamination film, liner film, zipper packaging.
LLDPE - Film	Lyondellbasell	GS906061	0.6	Agriculture film, bags & pouches, can liners, film wrap, food packaging film, heavy duty packaging, lamination film, liner film, retail carryout bags, shrink film.
LLDPE - Film	Lyondellbasell	GS906062	0.6	Agriculture film, bags & pouches, can liners, film wrap, food packaging film, heavy duty packaging, lamination film, liner film, retail carryout bags, shrink film.
LLDPE - Film	SCG	L2009FA	1	Heavy duty bag, industrial bag, agricultural film
LLDPE - Film	SCG	L2009F	1	Heavy duty bag, industrial bag, agricultural film
LLDPE - Film	SCG	L1810FI	1	Heavy duty bag, industrial bag, fruit & vegetable bag, water-quench blown film
LLDPE - Film	Exxon Mobil	1001 series	1	Agricultural film, garment film, mutilayer packaging film, bag in box, general packaging, packaging films, barrier food packaging, heavy duty bags, produce bags, blown film, ice bags, refuse bags, bread bags, indutrial liners, shoppers, food packaging, industrial packaging, stand up pouches, form fill and seal packaging, lamination film, trash bags, freezer film
LLDPE - Film	Exxon Mobil	1001.32	1	cast film, liners, cast stretch film, produce bags, industrial liners, refuse bags
LLDPE - Film	Exxon Mobil	1002 series blown	2	Agricultural film, freezer film, mulch film, bag in box, garment film, packaging films, blown film, general packaging, produce bags on a roll, cast film, industrial packaging, shoppers, food packaging, institutional can liners, trash can liners, form fill and seal packaging, liners
LLDPE - Film	Exxon Mobil	1002YB cast	2	cast film, cast stretch film, garment film, general packaging, hygiene film, packaging films, personal care
LLDPE - Film	Exxon Mobil	1107series	0.8	Blown film, garment film, produce bags
LLDPE - Film	Exxon Mobil	1236	3.6	blown film, food packaging, zipper bag, bread bags, packaging films, cast film, paper overwrap.
LLDPE - Film	Exxon Mobil	3001.32	1	Freezer film, ice bag, heavy duty bags, trash bags
LLDPE - Film	Exxon Mobil	3001.63	1	Freezer film, ice bag, heavy duty bags, trash bags, stretch film
LLDPE - Film	Exxon Mobil	3002.32	2	Cast film, cast stretch film, packaging films
LLDPE - Film	Exxon Mobil	3003 series	3.2	Cast film, cast stretch film, packaging films
LLDPE - Film	Exxon Mobil	3201 series	0.8	Freezer film, heavy duty bags, grocery sacks, merchandise bags
LLDPE - Film	Exxon Mobil	3402.48 blown	2	agricultural film, diaper backsheet, blown film, overwrap film
LLDPE - Film	Exxon Mobil	3402.48 cast	2	Agricultural film, diaper backsheet, cast film, overwrap film
LLDPE - Film	Exxon Mobil	3404.48	4.3	agricultural film, diaper backsheet, cast film, overwrap film
LLDPE - Film	Exxon Mobil	1002AY	2	Blown film, Food packaging, cast film, multilayer packaging film
LLDPE - Film	Exxon Mobil	1004AY	2.8	Cast film, Cast stretch film, food packaging, Form fill and seal packaging, general packaging
LLDPE - Film	Chevron Phillips Marlex	7105D	0.5	High strength industrial film and bags � Thin gauge applications � General purpose packaging
LLDPE - Film	Chevron Phillips Marlex	7109 series	0.9	Industrial films and bags � Thin gauge applications � General purpose packaging
LLDPE - Film	Chevron Phillips Marlex	7120B	2	Coextrusions � Blend component to improve drawdown � Thin gauge applications � General purpose packaging
LLDPE - Film	Chevron Phillips Marlex	7120X	2	Coextrusions � Blend component to improve drawdown � Thin gauge applications � General purpose packaging
LLDPE - Film	Chevron Phillips Marlex	7308DK	0.8	� Industrial films and bags that require added stiffness � Thin gauge applications � General purpose packaging
LLDPE - Film	Chevron Phillips Marlex	7308FK	0.8	Industrial films and bags that require added stiffness � Thin gauge applications � General purpose packaging
LLDPE - Film	Novachemicals	FP120 Series	MI: 1	General purpose film, co-extrusion and lamination Food packaging, freezer film, lamination and sealant film Food packaging, freezer film, lamination and sealant film Food packaging, freezer film, lamination and sealant film Food packaging, freezer film, lamination and sealant film Heavy duty shipping sacks, high strength packaging
LLDPE - Film	Novachemicals	PF -0118 series	MI: 1	Trash�bags,�liners,�general�packaging Industrial liners, heavy duty bags Trash bags, garmnet film, bags?on?roll Stretch wrap, blend resin, industrial packaging Customer applications requiring PCR blending
LLDPE - Film	Novachemicals	PF-Y818	0.8	Food packaging, garment film, trash bags Food packaging, industrial packaging, liners Food packaging, industrial packaging, stretch wrap, blend
LLDPE - Film	Novachemicals	PF-0218	2	Trash bags, liners, general packaging Industrial liners, heavy duty bags Stretch wrap, blend resin, industrial packaging
LLDPE - Film	Chandra Asri	UF1810	1	Cast and blown film, Multi-layer film, Stretch film, Powder coating
LLDPE - Film	Chandra Asri	UF1810T	1	Blown film, cover sheet, inner liner, garment sack, rice bag and transparent film
LLDPE - Film	Chandra Asri	UF1820S1	2	Blown film, garbage bag, inner liner, ice mambo bag, shopping bag and agriculture film
LLDPE - Film	GC InnoPlus	LL7410	1	General purpose films, Liners, Food packaging, Heavy duty and Agricultural films
LLDPE - Film	GC InnoPlus	LL7420	2	Stretch wrap films, Liners, Industrial bags, General purpose Film, Food packaging Refuse sacks and Garbage bags
LLDPE - Film	GC InnoPlus	LL7428A	MFI; 2.8	Stretch wrap films, Liners, Industrial bags, General purpose Film, Food packaging Refuse sacks and Garbage bags
LLDPE - Film	GC InnoPlus	LL7610A	1	InnoPlus LL7610A is recommended in blending formula for producing the general purpose films, liners, heavy duty films, food packaging and agricultural films.
LLDPE - Film	GC InnoPlus	LL7625A	2.5	InnoPlus LL7625A is recommended for cast stretch film and in blending formula for producing food packaging and general purpose films.
LLDPE - Film	Sabic	218WJ	MI: 2	Lamination film, thin liners, bags, coextruded films, consumer packaging, and other general-purpose applications.
LLDPE - Film	Sabic	218NJ	MI: 2	Lamination film, thin liners,bags, coextruded films, consumer packaging and other general- purpose applications
LLDPE - Film	Sabic	118LJ	MI: 1	Shipping sacks, ice bags, frozen food bags, stretch wrap film, produce bags, liners, carrier bags, garbage bags, agricultural films, laminated and coextruded films for meat wrap, frozen food and other food packaging, shrink film (for blending with LDPE), industrial consumer packaging, and high clarity film applications if blended with (10?20%) LDPE.
LLDPE - Film	Sabic	118NE	1	Typical applications for SABIC LLDPE 118NE are shipping sacks, ice bags, frozen food bags, liners, carrier bags, garbage bags, agriculture films, lamination and coextruded films, shrink film (for blending with LDPE), industrial consumer packaging and high clarity film if blended with (10-20%) LDPE.
LLDPE - Film	Sabic	118P	1	(frozen) food bags and lamination films
LLDPE - Film	Sabic	118WE	1	shipping sacks, ice bags, frozen food bags, liners, carrier bags, garbage bags, agriculture films, lamination and coextruded films, shrink film (for blending with LDPE), industrial consumer packaging and high clarity film if blended with (10-20%) LDPE
LLDPE - Film	Sabic	118WSJ	1	Shipping sacks, ice bags, frozen food bags, stretch wrap film, produce bags, liners, carrier bags, garbage bags, agricultural films, laminated and coextruded films for meat wrap, frozen food and other food packaging, shrink film (for blending with LDPE), industrial consumer packaging, and high clarity film applications if blended with (10?20%) LDPE.
LLDPE - Film	Sabic	118ZJ	1	Shipping sacks, ice bags, frozen food bags, stretch wrap film, produce bags, liners, carrier bags, garbage bags, agricultural films, laminated and coextruded films for meat wrap, frozen food and other food packaging, shrink film (for blending with LDPE), industrial consumer packaging, and high clarity film applications if blended with (10 - 20%) LDPE.
LLDPE - Film	Sabic	120NT	1.4	Agricultural film, lamination film/pouch, package film/pouch etc.
LLDPE - Film	Sabic	120WJ	1	Ice and frozen food bags, liners, produce bags, bread bags, textile & garment packaging.
LLDPE - Film	Sabic	121WJ	1	Ice bags, frozen food bags, produce bags, bread bags, carrier bags, garment bags, laminated films for food packaging.
LLDPE - Film	Sabic	128CNJ	1	Bedding and Jacketing for low/medium voltage power cables and jacketing for telecommunication cables, electrical conduits and drip & irrigation pipes.
LLDPE - Film	Sabic	218B	2
LLDPE - Film	Sabic	218BE	2.1	food applications (lamination film, barrier film) but can also be used in industrial packaging and as blending partner with other SABIC PE resins in both blown and cast film applications.
LLDPE - Film	Sabic	218BJ	2	food applications (lamination film, barrier film), melt embossed films, but can also be used in industrial packaging such as cling film and stretch film for manual and pallet wrap
LLDPE - Film	Sabic	218NJ	2	Lamination film, thin liners, shopping bags, carrier bags, garbage bags, coextruded films, consumer packaging and other general-purpose applications.
LLDPE - Film	Sabic	218NT	2	general purpose package, agricultural film, textile package, thin coating layer, garbage bag, lamination film, co-extrusion film stretch film and consumer package etc.
LLDPE - Film	Sabic	220HT	2	general purpose package, textile package, thin coating layer, garbage bag, lamination film, co-extrusion film stretch film and consumer package etc.
LLDPE - Film	Sabic	220NT	2.4	General purpose film & pouch, Agricultural film, stretch film for manual stretch etc.
LLDPE - Film	Sabic	220WT	2	general purpose package, textile package, thin coating layer, garbage bag, lamination film, co-extrusion film stretch film and consumer package
LLDPE - Film	Sabic	221WT	1.9	Cloth bag, carrier bag, thin layer coating, refuse bag, meat packaging and other food packaging or lamination film ,general purpose consumer packaging etc.
LLDPE - Film	Sabic	222WT	1.9	Cloth bag, carrier bag, thin layer coating, refuse bag, meat packaging and other food packaging or lamination film ,general purpose consumer packaging etc.
LLDPE - Film	Sabic	318BE	2.8	hand and pallet stretch wrap, cast stretch film
LLDPE - Film	Sabic	318BJ	2.8	hand and pallet stretch wrap, cling film, melt embossed film and other genera-purpose application.
LLDPE - Film	Sabic	318CNJ	2.8	One-step or two-step Silane cross-linkable insulation for Low Voltage power insulation cable, Aerial bundle cable and suitable for telecommunication and Low Voltage power cable jacketing.
LLDPE - Film	Sabic	320BT	2.8	1-step or 2-step silane crosslinking low voltage power cable insulation, Bundle assembled aerial cable,Telecom cable jacketing, Low voltage power cable jacketing, Compounding for halogen-free flame retardant cable.
LLDPE - Film	Sabic	320NT	2.8	Compounding for silane crosslinking low voltage power cable insulation, Compounding for halogen-free flame retardant cable, Other compounding
LLDPE - Film	Sabic	430BE	4.2	Skin layers for non-cling stretch cast film, cast film side encapsulation, mid layer hygienic cast film and product to realize downgauging by stiffness enhancement.
LLDPE - Film	Sabic	518N	0.5	heavy duty shipping sacks, ice bags, frozen food bags, potato bags and agriculture films. Film properties: Film of 50 �m and BUR=2 has been produced on Kiefel IBC with 130 kg/h
LLDPE - Film	Sabic	518NJ	0.5	Heavy duty shipping sacks, ice bags, frozen food bags, potato bags and agriculture films.
LLDPE - Film	Sabic	518NT	0.5	heavy duty film, general purpose package, agricultural film, textile package, thin coating layer, garbage bag, co-extrusion film stretch film and consumer package etc.
LLDPE - Film	Sabic	6118LE	0.9	heavy duty bags, lamination films, agriculture films, stretchwrap films, frozen food packaging and other applications requiring high impact strength, high tear resistance and improved sealing properties.
LLDPE - Film	Sabic	6118NSF	0.9	heavy duty bags, lamination films, agriculture films, stretch wrap films, frozen food packaging and other applications
LLDPE - Film	Sabic	6218B	2.2	Film propertiesFilm of 50 �m with BUR=2
LLDPE - Film	Sabic	631B	2.8	Cast films.
LLDPE - Film	Sabic	6318BE	3.2	pallet stretch wrap (pre-stretch), high performance draw down films and other mono layer
LLDPE - Film	Sabic	6318BJ	2.8	pellet wrap (pre-stretch), high performance draw down films and other general purpose applications
LLDPE - Film	Sabic	6335BE	2.8	non cling layers in pallet stretch wrap (pre-stretch), high performance draw down films and other mono layer and coextruded film applications
LLDPE - Film	Sabic	6821NE	0.8	e heavy duty bags, lamination films, agriculture films, stretch wrap films, frozen food packaging and other applications
LLDPE - Film	Sabic	6821NJ	0.8	Heavy duty shipping sacks, lamination films, Ice and frozen food bags, agricultural films, stretch wrap films.
LLDPE - Film	Sabic	726N	0.7	shipping sacks, produce bags, can liners and carrier bags.
LLDPE - Film	Sabic	726NE	0.7	shipping sacks, produce bags, can liners and carrier bags.
LLDPE - Film	Sabic	726NJ	0.7	shipping sacks, produce bags, can liners and carrier bags
LLDPE - Film	Sabic	726QE	0.7	shipping sacks, produce bags, can liners and carrier bags
LLDPE - Film	Sabic	920NT	0.85	Agriculture film, heavy duty film, general purpose packaging film, stretch film, carrier bag, inner liner, refuse bag, produce bag, frozen bag, co-extrusion film/pouch, etc.
LLDPE - Film	Sabic	926NT	0.85	Heavy duty film, agriculture film, general purpose packaging film, stretch film, carrier bag, produce bag, etc.
LLDPE - Film	Sabic	BX202	2.1	food and non-food packaging.
LLDPE - Film	Sabic	C2820T	2.8	cast film, the film made
LLDPE - Film	Reliance	F22020 F18020	2	Blown & Cast Films. For Co extrusion, Lamination, Mulch films for Agriculture, Shopping bags, Liners, Protection films, Bubble wrap films & other packaging films
LLDPE - Film	Reliance	F18030	3	Co ex Films, Stretch & Cling Films, Hygiene Films, Personal Care, General Purpose packaging.
LLDPE - Film	Reliance	F19010 F18010	1	Mono & Multilayer Blown films for liner bags, lamination films, films for liquid packaging and consumer packaging. Non & Anti block grades for Stretch Cling films, Lamination & Protection films
LLDPE - Film	Reliance	F22020 F18020	2	Blown & Cast Films. For Co extrusion, Lamination, Mulch films for Agriculture, Shopping bags, Liners, Protection films, Bubble wrap films & other packaging films.
LLDPE - Film	Reliance	HP19010	1.1	, anti-block for heavy duty film, liquid packaging
LLDPE - Film	Reliance	JD22010	1.1	The grade is recommended for different range of wall thickness drip irrigation tubing for online drip laterals and flat as well as round emitting pipe
LLDPE - Film	Reliance	JE24065	6.5	Extrusion coating on HDPE woven fabric, Jute, Al foil etc.
LLDPE - Film	Reliance	JF18010	1.1	Mono & Multilayer Blown/Cast films for lamination, stretch cling films & protection films
LLDPE - Film	Reliance	JF18020	2.3	Blown & Cast film for Industrial Packaging, Stretch Wrap, Cling film for food or hygiene packaging, Bubble Wrap, Protective Packaging and Lamination film
LLDPE - Film	Reliance	JF19010	1.1	Mono & Multilayer Blown films for liner bags, films for liquid and industrial consumer packaging, shrink film, shipping sacks, agricultural film etc.
LLDPE - Film	Reliance	JF19020	2	Blown Films for Co-extrusion, Agricultural Films, Shopping bags, Liners, Consumer packaging & other general purpose packaging films.
LLDPE - Film	Lotte	UF313	MFI; 1.1	Agricultural mulching films and artificial turf
LLDPE - Film	Lotte	UF315	1.1	General Blown Film
LLDPE - Film	Lotte	UF919	1.1	General Purpose Film
LLDPE - Film	Lotte	UF917	1.1	General Purpose Film
LLDPE - Film	Lotte	UF915	1.5	General Purpose Film
LLDPE - Film	Lotte	UF914	1.1	General Purpose Film
LLDPE - Film	Lotte	UF415	1.5	General Purpose Film
LLDPE - Film	Lotte	UF414	2	General Purpose Film
LLDPE - Film	Lotte	UF317	1.1	General Purpose Film
LLDPE - Film	Lotte	UL913A	1.5	General Purpose Film
LLDPE - Film	Lotte	UL912A	1.2	General Purpose Film
LLDPE - Film	Lotte	UL911A	1.2	General Purpose Blown Film
LLDPE - Film	Lotte	UL412A	MFI ; 1.5	Lamination Film
LLDPE - Film	Lotte	UL314P	1.1	Protection Film
LLDPE - Film	Lotte	UL312	1.1	Lamination Film
LLDPE - Film	Lotte	UF927	1.1	General Purpose Film
LLDPE - Film	Lotte	UF925	1.1	General Purpose Film
LLDPE - Film	Lotte	UN315	1.1	General Purpose Film, Heavy Duty Film
LLDPE - Film	Lotte	UN324	1.1	General Purpose Film, Heavy Duty Film
LLDPE - Film	Lotte	UN414	2	General Purpose Film
LLDPE - Film	Lotte	UT404	2.8	Cast Film, Stretch Film, Packaging Film
LLDPE - Film	Lotte	UT534	3.5	Cast Film
LLDPE - Film	Formosa	L42009A	0.95	Blending Resin Industrial Liners Industrial Packaging Garment Bags Co-Extrusion
LLDPE - Film	Formosa	L42009B	0.95	Blending Resin Industrial Liners Industrial Packaging Garment Bags Co-Extrusion
LLDPE - Film	Formosa	L42009E2	0.95	Blending Resin Industrial Liners Industrial Packaging Garment Bags Co-Extrusion
LLDPE - Film	Formosa	L42009F	0.95	Blending Resin Industrial Liners Industrial Packaging Garment Bags Co-Extrusion
LLDPE - Film	Formosa	L42009H	0.95	Blending Resin Industrial Liners Industrial Packaging Garment Bags Co-Extrusion
LLDPE - Film	Formosa	L42009M	0.95	Blending Resin Industrial Liners Industrial Packaging Garment Bags Co-Extrusion
LLDPE - Film	Formosa	L42009PE	0.95	Blending Resin Industrial Liners Industrial Packaging Garment Bags Co-Extrusion
LLDPE - Film	Formosa	L42022B	2	Blending resin, industrial packaging, co-extrusion, garment bags
LLDPE - Film	Formosa	L42022E2	2 with &	Blending resin, industrial packaging, co-extrusion, garment bags
LLDPE - Film	Formosa	L62009 series	0.95	Blending resin, industrial packaging, co-extrusion, garment bags
LLDPE - Film	Formosa	L62022B	2	Stretch film (core layer)
LLDPE - Film	Formosa	Formax L9 series (L91507A, L91507 E2, L91507 H)	0.8	Industrial packaging Industrial liners Food packaging Can liners Consumer trash bags Coextrusion
LLDPE - Film	Formosa	Formax L91720 B	2 No , no	Industrial packaging Industrial liners Food packaging Stretch Film Can liners Consumer trash bags Coextrusion
LLDPE - Film	Formosa	Formax L91930 B	3 No , no	Industrial packaging Industrial liners Food packaging Stretch Film Can liners Consumer trash bags Coextrusion
LLDPE - Film	Ineos	LL6120AA	2.3	high performance cast stretch film applications and can be used, for example, as a core layer in co-extruded structures.
LLDPE - Film	Ineos	LL6130AA	3	high performance cast stretch film applications, in particular as a core layer in co-extruded structures.
LLDPE - Film	Ineos	LL6208AF	0.9	rich blends in heavy duty sacks, liners and other thin film applications requiring excellent mechanical performance. This grade is also recommended for artificial grass applications
LLDPE - Film	Ineos	LL6208LJ	0.9	blown film applications where excellent mechanical and optical performance is required
LLDPE - Film	Ineos	LL6430AA	3.2	high performance cast stretch film applications, in particular as an anticling layer in co-extruded structures and in core layer where higher stiffness is required.
LLDPE - Film	Ineos	LL6608AF	0.9	lean and rich blend blown film applications, such as rigid layers in co-extrusion, carrier bags, refuse sacks and liners. This grade is also recommended for artificial grass applications
LLDPE - Film	Ineos	LL6608LJ	0.9	production of mailing film, carrier, bread and produce bags
LLDPE - Film	Ineos	LL6808AA	0.85	Geomembranes and Geoliners. � Blown film requiring improved stiffness. � Artificial grass
LLDPE - Film	Ineos	LL6910AA	1	lean and rich blend blown film applications, such as overwrap, counter bags, shrink film (lean blends, 10 to 30% LLDPE) and boil-in-the-bag applications. This grade is also recommended for artificial grass applications.
LLDPE - Film	Ineos	LL6910KJ	1	lean and rich blend blown film applications, such as overwrap, counter bags, shrink film (lean blends, 10 to 30% LLDPE) and stand-up pouch applications.
LLDPE - Film	Ineos	LL6910LA	1	rigid blown film grade offering a certified low level of gels making it ideal for lamination or thin film applications with highly decorative printing.
LLDPE - Film	Ineos	LL6930AA	3.5	anti-cling layer in co-extruded stretch-film structures and for hygienic film.
LLDPE - Film	Ineos	LL8109AA	0.9	rich blends for mulch film, refuse sacks, liners and other thin film applications where excellent mechanical performance is required
LLDPE - Film	Ineos	LL8109KB	0.9	rich blends for mulch film, refuse sacks, liners and other thin film applications where excellent mechanical performance and high are required.
LLDPE - Film	Braskem	LF0720	0.7	Blends with HDPE, Blends with LDPE, General use packing
LLDPE - Film	Braskem	LH0820/30AF	0.8	Bags with valve, Blends with HDPE, Blends with LDPE, Industrial Sacks, Laminates
LLDPE - Film	Braskem	LH218	2.3	Stretch Films
LLDPE - Film	Braskem	SLL118/21	1	Blends with HDPE, Blends with LDPE, Liners, Technical films, Technical films for automatic packaging
LLDPE - Film	Braskem	SLL218/21	2	Blends with HDPE, Blends with LDPE, Liners, Roll films for automatic packaging
LLDPE - Film	Braskem	SLL5405S	1	Film
LLDPE - Film	Westlake	SC74844	0.5	Fresh produce packaging
LLDPE - Film	Westlake	SC74853	0.5	Fresh produce packaging
LLDPE - Film	Westlake	SC74858	0.5	Fresh produce packaging
LLDPE - Film	Westlake	LT74134	0.5	High-strength consumer trash bags
LLDPE - Film	Westlake	SC74875	0.75	Blown film extrusion ? Heavy duty films
LLDPE - Film	Westlake	LT74159	0.5	Ice bags ? Heavy duty films
LLDPE - Film	Westlake	LT74104	1	Vegetable packaging ? Bread bags ? Ice bags
LLDPE - Film	Westlake	LT74105	1	Vegetable packaging ? Bread bags ? Ice bags
LLDPE - Film	Westlake	LT74113	1	Vegetable packaging ? Bread bags ? Ice bags
LLDPE - Film	Westlake	LT74147	1	Vegetable packaging ? Bread bags ? Ice bags
LLDPE - Film	Westlake	LF74859AD	0.6	General purpose blown film ? Heavy duty films ? Fresh produce packaging
LLDPE - Film	Westlake	LF1010	0.8	Agricultural films ? Trash bags ? Shrink films
LLDPE - Film	Westlake	LF2010	0.8	Bags and sacks Agricultural films Trash bags and liners
LLDPE - Film	Westlake	LF2020	1	Bags and sacks, Trash bags and liners, Co-extruded structures
LLDPE - Film	Westlake	LF1022	1.1	Food storage bags, Can liners, Agricultural film
LLDPE - Film	Westlake	LF2025	1	Bags and sacks, Trash bags and liners, Co-extruded structures
LLDPE - Film	Westlake	LF1020	1.1	Stretch wrap, Agricultural films, Trash bags
LLDPE - Film	Westlake	LF1026	1.1	Stretch wrap, Agricultural films, Trash bags
LLDPE - Film	Westlake	LF1040	2	Blend stock, Food packaging, Stretch wrap
LLDPE - Film	Westlake	LF1030	2.5	Cast stretch film
LLDPE - Film	Westlake	LF2051	3.5	Cast film extrusion, Cast stretch film
LLDPE - Film	Westlake	LF1050	3.5	Cast or Profile cast film extrusion, Blend resin for general-purpose packaging
LLDPE - Film	Sasol	HF2020	2	Cast stretch film (mono and co-extruded) General purpose low pressure pipe
LLDPE - Film	Sasol	HF2110	1	Blending into LDPE Blown stretch film General purpose low pressure pipe
LLDPE - Film	Sasol	HF2308E	0.8	Blending into HDPE or LDPE Heavy duty film (>75 ?m)
LLDPE - Film	Sasol	HF2410M	1	Blending into LDPE General packaging (30 to 70 ?m)
LLDPE - Film	Sasol	HF2910T	1	Blending into LDPE General packaging thin film (10 to 30 ?m) Not recommended for lamination film
LLDPE - Film	Reliance	F19010 F18010	1	Mono & Multilayer Blown films for liner bags, lamination films, films for liquid packaging and consumer packaging. Non & Anti block grades for Stretch Cling films, Lamination & Protection films
LLDPE - Film	Reliance	LL20DS010	1.2	Drip laterials, general purpose packaging
LLDPE - Film	Reliance	LL20FA010	1	Lamination film
LLDPE - Film	Reliance	LL20FS020 LL20FA020	2	Blown & Cast Films. For Co extrusion, Lamination, Mulch films for Agriculture, Shopping bags, Liners, Protection films, Bubble wrap films & other packaging films.
LLDPE - Film	Reliance	LL20FS010	1	, anti-block for heavy duty film, liquid packaging
LLDPE - Film	Reliance	LL20FS020 LL20FA020	2	Blown & Cast Films. For Co extrusion, Lamination, Mulch films for Agriculture, Shopping bags, Liners, Protection films, Bubble wrap films & other packaging films.
LLDPE - Film	Reliance	LL36RA045	4.5	Overhead water tank, loft tank, litter bin etc
LLDPE - Film	Reliance	O19010	0.9	, anti-block grade for speciality film, liquid packaging
LLDPE - Film	Reliance	O21010	0.9	Specialty lamination film
LLDPE - Film	Reliance	O35042	4.5	Chemical storage, septic and general purpose tanks
LLDPE - Film	Hanwha	3120	1	general purpose and agricultural film
LLDPE - Film	Hanwha	3121UV	1.1	Agricultural film, General purpose
LLDPE - Film	Hanwha	3126	1	Thin film
LLDPE - Film	Hanwha	3127	1	Sealant film for lamination
LLDPE - Film	Hanwha	3224	2	General purpose film, Foaming film
HDPE - Pipe	SCG	H1000P	7.4	Produce: Drainage pipes, sewage pipes, water pipes, corrugated pipes, color stripes
HDPE - Pipe	SCG	H1000PBL	-	Drinking water pipes, stripe for PE100 pipe
HDPE - Pipe	SCG	H1000PC	-	Drinking water pipes, gas pipes, drainage & sewerage pipes, corrugated pipes, industrial pipes
HDPE - Pipe	SCG	H1000PCI	-	Injection molding fitting element for butt -fusion and electro fusion socket and saddle welding pipe.
HDPE - Pipe	SCG	H1000PWI	-	Above ground pipes, Co-Extrusion of pipes
HDPE - Pipe	SCG	H112PC	-	Drinking water pipes, gas pipes, industrial pipes, slurry pipes
HDPE - Pipe	SCG	H5211PC	-	Drainage pipes, potable water pipes, sewerage pipes, industrial pipes
HDPE - Pipe	Sabic	B5411	0.4	blow molding and sheet extrusion
HDPE - Pipe	Sabic	B5823	0.16	packaging the majority of household and industrial chemicals, such as detergents, cleaners, shampoos and cosmetics, as well as food packaging
HDPE - Pipe	Sabic	F4520	0.16	r packaging of aggressive detergents and technical articles such as spare fuel tanks, air- and cable ducts
HDPE - Pipe	Formosa	E900	0.04	Corrugated pipe; Non-pressure pipe extrusion applications
HDPE - Pipe	Formosa	E6210A	0.04	Potable water; Oil & Gas Gathering and Distribution; Chemical; Industrial and Mining
HDPE - Pipe	Formosa	E6210C	0.04	Potable water; Oil & Gas Gathering and Distribution; Chemical; Industrial and Mining
HDPE - Pipe	Formosa	HP3902	0.2	Gas Distribution pipe; Oilfield and Other industrial piping system
HDPE - Pipe	Formosa	HP4000	0.14	Telecommunications Conduit; Non pressure pipe applications
HDPE - Pipe	Formosa	HP4401	0.11	Potable water; Oil & Gas Gathering and Distribution; Chemical; Industrial and Mining
HDPE - Pipe	Formosa	HP4525	0.3	Conduit pipe; Telecommunication pipe; Drip Irrigation pipe
HDPE - Pipe	Formosa	HL5010	10	Shipping container; Gasoline tank; Chemical tank; Pallets; Conrrugated pipe;�
HDPE - Pipe	Formosa	HP6000	0.65	Coonrugated pipe; Drain Tile; Composite Lumber
HDPE - Pipe	Lyondellbasell	Alathon 8005M-3	0.07	Drainage Pipe
HDPE - Injection	SCG	H355JA	7.5	Caps and closures for still and mineral water, juice, tea, and hot-filled beverages
HDPE - Injection	SCG	H455JA	4.5	Caps and closures for still and mineral water, juice, and tea
HDPE - Injection	SCG	H555J	1.8	Caps and closures for carbonated soft drinks and hot fill beverages
HDPE - Injection	SCG	H555JA	1.8	Caps and closures for carbonated soft drinks, hot fill beverages and water
HDPE - Injection	SCG	H567J	-	Caps and closures for carbonated soft drinks and hot fill beverages
HDPE - Injection	SCG	H567JA	-	Caps and closures for carbonated soft drinks and hot fill beverages
HDPE - Injection	SCG	H568J	0.8	Beverage caps and closures. Carbonated soft drink. Sparkling water
HDPE - Injection	JG Summit	HJ04551	0.955	Pallets and crates for cold storage applications
HDPE - Injection	JG Summit	HJ04601	0.96	Pallets, Dunnage trays, Crates, Industrial parts
HDPE - Injection	JG Summit	HJ04602	0.96	Beverage caps for mineral water, juice and tea drinks
HDPE - Injection	JG Summit	HJ08601	0.96	Beverage caps for mineral water, juice and tea drinks
HDPE - Injection	JG Summit	HJ20571	0.957	Housewares, Caps, Pails, Toys
HDPE - Injection	Lyondellbasel	Alathon 9301	0.35	Sheet and Profile Extrusion
HDPE - Injection	Lyondellbasel	Alathon�9302	0.06	General Sheet Extrusion
HDPE - Blow	SCG	H5840B		Chemical bottles, Chemical drums, (Containing volume up to 30 liters), Personal and homecare bottles, Lube oil bottles, Brake fluid bottles
HDPE - Blow	SCG	H6140B		Personal and homecare bottles, Lube oil bottles, Brake fluid bottles, Chemical bottles, Milk bottles
HDPE - Blow	SCG	H6430BM		Drinking water bottles (containing volume up to 20 liter), milk bottles, fruit juice bottles, fish sauce gallons
HDPE - Blow	SCG	H6670B		Milk bottles, fruit juice bottles.
HDPE - Blow	JG Summit	HB09521	0.952	Medium size extrusion blow molded containers (10-50 liters) for household and industrial chemicals (HIC), condiments and cooking oil
HDPE - Blow	JG Summit	HB23551	0.955	Rigid packaging, Food, beverage and condiment packaging, Bottles for personal care products, Bottles for household and industrial chemicals (HIC)
HDPE - Blow	JG Summit	HB33531	0.953	Rigid packaging, Food, beverage and condiment packaging, Bottles for personal care products, Bottles for household and industrial chemicals (HIC)
HDPE - Blow	Formosa	HB4903	0.3	Fuel Tanks; Garbage Cans; Seating; Large Industrial Containers; Sheet
HDPE - Blow	Formosa	HB5202B	0.35	Bleach and Detergents; Industrial Housings; Tanks
HDPE - Blow	Formosa	HB5502A	0.35	General Purpose Packaging; Bleach and Detergents; Persona Care Products; Industrial Chemical & Parts
HDPE - Blow	Formosa	HB5502F	0.35	Pharmaceuticals; Food Packaging; Industrial Chemicals; Industrial Parts; Pallets
HDPE - Blow	Formosa	HB5502Z	0.35	Pharmaceutical Packaging
HDPE - Blow	Formosa	HL5010	10	Pallets; Large form parts; Corrugated Pipe; Conduit Pipe; Gasoline tank
HDPE - Blow	Formosa	HB6007F	0.7	Soft Drink Concentrate; Fruit Juice; Distilled Water
HDPE - Blow	Formosa	HB6007	0.7	Soft Drink Concentrate; Fruit Juice; Distilled Water
MLLDPE	Chevron Philips (Marlex)	D139	1 No slip & no antiblock	typical blown film: seal layer in coextrusions, heavy duty packaging, clarity packaging
MLLDPE	Chevron Philips (Marlex)	D143	1.4 no slip, no antiblock	Seal layer in coextrusions � Heavy duty packaging � Clarity packaging
MLLDPE	Chevron Philips (Marlex)	D163	0.9 no slip, no antiblock	Seal layer in coextrusions � Heavy duty packaging � Clarity packaging
MLLDPE	Chevron Philips (Marlex)	D170DK	0.9 no slip, with antiblock	Heavy duty packaging � Industrial packaging � Institutional packaging
MLLDPE	Ineos	BPD3801	5.5	Wire & Cable applications.
MLLDPE	Ineos	PF0101XA	1.3	highly technical film like food packaging, lamination and co-extrusion applications
MLLDPE	Ineos	PF0101XJ	1.3	highly technical film like food packaging, lamination and co-extrusion applications
MLLDPE	Ineos	PF0601XA	1.3	highly technical film like food packaging, lamination and co-extrusion applications
MLLDPE	Ineos	PF1315AZ	15	For extrusion coating: � extrusion coating polymer for high demand on sealing and mechanical performance For injection moulding and compounding: � absence of any kind of additive allowing tailor formulation of specific compounds and master-batches
MLLDPE	Ineos	PF1320AZ	20	For extrusion coating: � extrusion coating polymer for high demand on sealing and mechanical performance For injection moulding and compounding: � absence of any kind of additive allowing tailor formulation of specific compounds and master-batches
MLLDPE	Ineos	PF6012AA	1.3	highly technical film like food packaging, lamination and coextrusion applications
MLLDPE	Ineos	PF6012KJ	1.3	highly technical film like food packaging, lamination, and other thin film applications
MLLDPE	Ineos	PF6030XA	3	high performance cast stretch film applications in co-extruded structures as well as for other advanced polyolefin films produced with cast extrusion process.
MLLDPE	Ineos	PF6112AA	1.3	food packaging and other thin film applications relatively thick film applications requiring superior mechanical strength and easy sealing like liners for containers and silos
MLLDPE	Ineos	PF6130AA	3.5	high performance cast stretch film applications, in both monolayer and co-extruded structures. It also can be used for the production of artificial grass monofilmaments.
MLLDPE	Ineos	PF6130LA	3.5	high performance cast stretch film applications, in both monolayer and co-extruded structures. It also can be used for the production of artificial grass monofilmaments.
MLLDPE	Ineos	PF6140AA	4.5	high performance cast stretch film applications, in both monolayer and co-extruded structures. It also can be used for the production of artificial grass monofilmaments.
MLLDPE	Ineos	PF6212AA	1.3	food packaging and other thin film applications where excellent mechanical and optical performance is required
MLLDPE	Ineos	PF6212AE	1.3	food packaging and other thin film applications
MLLDPE	Ineos	PF6212KE	1.3	food packaging and other thin film applications
MLLDPE	Ineos	PF6212KJ	1.3	food packaging and other thin film applications
MLLDPE	Ineos	PF6212LA	1.3	food packaging and other thin film applications
MLLDPE	Ineos	PF6212LJ	1.3	food packaging and other thin film applications
MLLDPE	Ineos	PF6220AA	2.1	collation shrinkwrap, food packaging and other thin film applications
MLLDPE	Ineos	PF6220AE	2.1	food packaging and other thin film applications
MLLDPE	Ineos	PF6220KJ	2.1	collation shrinkwrap, food packaging and other thin film applications
MLLDPE	Ineos	PF6612AA	1.3	collation shrinkwrap, food packaging and other thin film applications
MLLDPE	Ineos	PF6612KE	1.3	collation shrinkwrap, food packaging, refuse sacks and other thin film applications
MLLDPE	Ineos	PF6612KJ	1.3	collation shrinkwrap, food packaging and other thin film applications
MLLDPE	Ineos	TUB220-RT	1.2	Underfloor and wall heating & cooling � Industrial pipes and fittings
MLLDPE	Ineos (Eltex PF)	PF0101XA	1.3	highly technical film like food packaging, lamination and co-extrusion applications where superior mechanical and sealing performance is required
MLLDPE	Ineos (Eltex PF)	PF0101XJ	1.3	highly technical film like food packaging, lamination and co-extrusion applications
MLLDPE	Ineos (Eltex PF)	PF0601XA	1.3	highly technical film like food packaging, lamination and co-extrusion applications
MLLDPE	Ineos (Eltex PF)	PF1315AZ	15	For extrusion coating: � extrusion coating polymer for high demand on sealing and mechanical performance For injection moulding and compounding: � absence of any kind of additive allowing tailor formulation of specific compounds and master-batches
MLLDPE	Ineos (Eltex PF)	PF1320AZ	20	For extrusion coating: � extrusion coating polymer for high demand on sealing and mechanical performance For injection moulding and compounding: � absence of any kind of additive allowing tailor formulation of specific compounds and master-batches
MLLDPE	Ineos (Eltex PF)	PF6012AA	1.3	n highly technical film like food packaging, lamination and coextrusion applications, particularly suitable for multilayer film applications where it can be used neat or as a blending partner with LLDPE or LDPE in sealing layers.
MLLDPE	Ineos (Eltex PF)	PF6012KJ	1.3	highly technical film like food packaging, lamination, and other thin film applications
MLLDPE	Ineos (Eltex PF)	PF6030XA	3	high performance cast stretch film applications in co-extruded structures as well as for other advanced polyolefin films produced with cast extrusion process.
MLLDPE	Ineos (Eltex PF)	PF6112AA	1.3	food packaging and other thin film applications where superior mechanical and optical performance is required. It is also particularly suitable for relatively thick film applications requiring superior mechanical strength and easy sealing like liners for containers and silos
MLLDPE	Ineos (Eltex PF)	PF6130AA	3.5	particularly suitable for high performance cast stretch film applications, in both monolayer and co-extruded structures. It also can be used for the production of artificial grass monofilmaments.
MLLDPE	Ineos (Eltex PF)	PF6130LA	3.5	high performance cast stretch film applications, in both monolayer and co-extruded structures. It is designed for applications which req
MLLDPE	Ineos (Eltex PF)	PF6140AA	4.5	high performance cast stretch film applications, in both monolayer and co-extruded structures. It also can be used for the production of artificial grass monofilaments.
MLLDPE	Ineos (Eltex PF)	PF6212AA	1.3	food packaging and other thin film applications where excellent mechanical and optical performance is required. For more demanding applications such as lamination and temporary surface protection,
MLLDPE	Ineos (Eltex PF)	PF6212AE	1.3	food packaging and other thin film applications where excellent mechanical and optical performance is required
MLLDPE	Ineos (Eltex PF)	PF6212KE	1.3	food packaging and other thin film applications
MLLDPE	Ineos (Eltex PF)	PF6212KJ	1.3	food packaging and other thin film applications where excellent mechanical and optical performance is required
MLLDPE	Ineos (Eltex PF)	PF6212LA	1.3	food packaging and other thin film applications where excellent mechanical and optical performance is required
MLLDPE	Ineos (Eltex PF)	PF6212LJ	1.3	food packaging and other thin film applications where excellent mechanical and optical performance is required. In addition, Eltex� PF6212LJ is a version intended for lamination applications
MLLDPE	Ineos (Eltex PF)	PF6220AA	2.1	collation shrinkwrap, food packaging and other thin film applications
MLLDPE	Ineos (Eltex PF)	PF6220AE	2.1	food packaging and other thin film applications where excellent mechanical and optical performance is required
MLLDPE	Ineos (Eltex PF)	PF6220KJ	2.1	collation shrinkwrap, food packaging and other thin film applications where an excellent balance between film strength and rigidity is required together with good optical properties.
MLLDPE	Ineos (Eltex PF)	PF6612AA	1.3	collation shrinkwrap, food packaging and other thin film applications
MLLDPE	Ineos (Eltex PF)	PF6612KE	1.3	collation shrinkwrap, food packaging, refuse sacks and other thin film applications
MLLDPE	Ineos (Eltex PF)	PF6612KJ	1.3	use in collation shrinkwrap, food packaging and other thin film applications where an excellent balance between film strength and rigidity is required together with good optical properties
MLLDPE	Ineos (Eltex Tub)	TUB220-RT	1.2	Underfloor and wall heating & cooling � Industrial pipes and fittings
MLLDPE	GC Innoplus	LL7810A	1	Heavy duty films, Stretch film, lamination films, liners, food packaging, multi-layer packaging film and freezer packaging films
MLLDPE	GC Innoplus	LL7820A	2	Heavy duty films, stretch films, lamination films, liners, food packaging, multi-layer packaging film and freezer packaging films
MLLDPE	GC Innoplus	LL7835A	3.5	Heavy duty films, cast stretch films, liners cast films, lamination films, blown films, food packaging and multi-layer packaging films
MLLDPE	GC Innoplus	LL7903A	0.3	Heavy duty films, lamination films, shrink film, stand-up pouches, multi-layer packaging films and freezer packaging films
MLLDPE	GC Innoplus	LL7905A	0.5	Heavy duty films, lamination films, shrink film, agricultural film, food packaging, multi-layer packaging films and freezer packaging films
MLLDPE	GC Innoplus	LL7910A	1	Heavy duty films, Lamination films, Liners, Food packaging, Multi-layer packaging films and Freezer packaging films
MLLDPE	Hanwha	M1810HC	1	Lamination, general purpose (high-slip)
MLLDPE	HANWHA	M1810HA	1	Lamination, general purpose (mid-slip)
ABS	Sabic	BDT5510		interior applications.
ABS	Sabic	BDT6500		interior applications
ABS	Sabic	DL100
ABS	Sabic	DL100LG
ABS	Sabic	DL200H
ABS	Sabic	EX39		sheet and blow molding applications.
ABS	Sabic	EX58		sheet extrusion and blow molding applications
ABS	Sabic	EX75		Multi-purpose, extrusion ABS providing a favorable balance of engineering properties.
ABS	Sabic	FR23
ABS	Sabic	FX610SK		multi purpose ABS injection moulding grade, providing a favourable balance of engineering properties
ABS	Sabic	G320A
ABS	Sabic	GRM2600L		refrigerator liner applications
ABS	Sabic	GX3800F		sheet extrusion
ABS	Sabic	HMG47MD		General purpose, injection molding ABS for medical applications.
ABS	Sabic	HMG94MD		Superior flow, injection molding ABS for thin-wall medical applications.
ABS	Sabic	INP449		�use as an FR anti-drip agent
ABS	Sabic	INP449		for color concentrates and alloys
ABS	Sabic	INP563		for color concentrates and alloys
ABS	Sabic	INP564		for color concentrates and alloys
ABS	Sabic	INP572
ABS	Sabic	INP576
ABS	Sabic	INP581
ABS	Sabic	INP984
ABS	Sabic	MG29
ABS	Sabic	MG34LG
ABS	Sabic	MG37EPX		�both painted and plated applications.
ABS	Sabic	MG38
ABS	Sabic	MG47		Multi-purpose, injection molding ABS
ABS	Sabic	MG94		�For thin-wall applications.
ABS	Sabic	MGABS01
ABS	Sabic	MGABS02
ABS	Sabic	X11
ABS	Sabic	450FF		shape molding with wall thickness less than 10 mm (5-10 mm) and for high density block molding with good surface finish.
ABS	Sabic	452		fast cycle shape and block molding applications�
ABS	Sabic	550FF		shape molding with wall thickness greater than 10 mm and for block molding with medium-to-high density for thermal insulation in construction industry.
ABS	Sabic	552		standard fast cycle grade used for shape molding with wall thickness greater than 10mm and medium to high density block molding.
ABS	Sabic	650FF		articles with large shape molding block molding with medium density for thermal insulation in construction industry.
ABS	Sabic	652		articles with large shape molding and medium density molding.
ABS	Sabic	760FF		low density block molding applications, such as AC ducts, cold storage and thermal insulation
ABS	Sabic	763		low density block molding, such as AC ducts and cold storage.
ABS	Ineos	Absolac 100		Automotive Interior and Exterior parts Helmets Shoe heels Decorative strips and Spoiler Irrigation fittings Lock Assembly
ABS	Ineos	Absolac 300		Housing & parts of TV & VCR Air Conditioner parts Vaccuum cleaners Flush tanks Telephone bodies Fan parts
ABS	Ineos	Absolac 700		Stationery goods Pens Toys Novelty Items Washing Machines
ABS	Ineos	Lustran 552		Profile extrusions Sheet substrate coextrusion
ABS	Ineos	Lustran 556		Motor vehicle dashboards Interior panels Interior trim
ABS	Ineos	Lustran 451		Major appliance
ABS	Ineos	Lustran 552		Profile extrusions Sheet substrate coextrusion
ABS	Ineos	Lustran 556		Motor vehicle dashboards Interior panels Interior trim
ABS	Ineos	Lustran 348		Components of intravenous (IV)systems Surgical instruments Diagnostic test kits
ABS	Ineos	Lustran 349		Components of intravenous (IV)systems Surgical instruments Diagnostic test kits
ABS	Ineos	Lustran LGA		Pillars Consoles Scuff plate Interior quarter trim panels
ABS	Ineos	Lustran Elite 1827		AB pillars Door panels Console and console trim Lamp housings
ABS	Ineos	Lustran Elite 1891		AB pillars Door panels Console and console trim Lamp housings
ABS	Ineos	Novodur HD 15		Medical appliances Inhalor housings Insuline pens
ABS	Ineos	Novodur HD M203FC		Medical appliances Inhaler housings Insuline pens
ABS	Ineos	Novodur P2H-AT		Household appliances Sport articles Oven casings
ABS	Ineos	Novodur P2HGV		Semi-structual automotive parts Gambling machines
ABS	Ineos	Novodur P2M-AT		Houshold appliances Telecommunication
ABS	Ineos	Novodur P2MC		Automotive grills Automotive trim Household appliances Various Sanitary Applicances
ABS	Ineos	Novodur P3H-AT		Household appliances Mixers Washing machines
ABS	Ineos	Novodur H604		Mirror housings Automotive interior trims Automotive interior decorations
ABS	Ineos	Novodur H605		Automotive interior trims Air inlets Vacuum cleaners
ABS	Ineos	Novodur H701		Automotive Home appliances Electrical and electronics
ABS	Ineos	Novodur H702		Painted exterior automotive mirrors Rear lamp automotive housings Automotive parts
ABS	Ineos	Novodur H801		Automotive interior trims Seat components Glove box components Door handles
ABS	Ineos	Novodur H802		Automotive rear lamp housings Automotive decorations
ABS	Ineos	Novodur H950		Painted exterior automotive mirrors Rear lamp automotive housings Automotive parts
ABS	Ineos	Novodur HH-106		Center consoles Radiator grills Mirror housings
ABS	Ineos	Novodur HH-112		Automotive rear lamp housings Glove box caps
ABS	Ineos	Novodur Ultra 4000PG		Decorative Elements Sanitary Applications Household parts
ABS	Ineos	Novodur Ultra 4105		Automotive interior pillar cappings Glove box components Centre consoles
ABS	Ineos	Terluran GP-22		Injection molding Appliance housings Household and sanitary appliances Toys Automotive components Consumer products
ABS	Ineos	Terluran GP-35		Injection molding Thin wall components for telecommunications Household and sanitary appliances Toys Automotive components Electroplating
ABS	Ineos	Terluran HI-10		Injection molding Compounding Appliance housings Lawn & garden components requiring superior toughness
ABS	Lgchem	AP163		Helmet, Pipe, Vacuum Cleaner,Washing Machine, Toy etc.
ABS	Lgchem	HF380		Helmet, Pipe, Vacuum Cleaner,Washing Machine, Toy etc.
ABS	Lgchem	HF380G		Helmet, Pipe, Vacuum Cleaner,Washing Machine, Toy e
ABS	Lgchem	HF380I		Helmet, Pipe, Vacuum Cleaner,Washing Machine, Toy etc.
ABS	Lgchem	HF380U		Helmet, Pipe, Vacuum Cleaner,Washing Machine, Toy etc
ABS	Lgchem	HF390		Helmet, Pipe, Vacuum Cleaner,Washing Machine, Toy etc.
ABS	Lgchem	HG173		Helmet, Pipe, Vacuum Cleaner,Washing Machine, Toy etc.
ABS	Lgchem	HI100		Helmet, Pipe, Vacuum Cleaner,Washing Machine, Toy etc.
ABS	Lgchem	HI100H		Helmet, Pipe, Vacuum Cleaner,Washing Machine, Toy etc.
ABS	Lgchem	HI121		Helmet, Pipe, Vacuum Cleaner,Washing Machine, Toy etc
ABS	Lgchem	HI121H		Helmet, Pipe, Vacuum Cleaner,Washing Machine, Toy etc
ABS	Lgchem	HT700		Helmet, Pipe, Vacuum Cleaner,Washing Machine, Toy etc.
ABS	Lgchem	SG175		Helmet, Pipe, Vacuum Cleaner,Washing Machine, Toy etc.
ABS	Lgchem	PI641		Pipe
ABS	Lgchem	RS650		Sheets for refrigerators, briefcases, bobbins
ABS	Lgchem	RS657L		Sheets for refrigerators, briefcases, bobbins
ABS	Lgchem	RS670		Refrigerator Inner Liner
ABS	Lgchem	RS800M		Sheets for refrigerators, briefcases, bobbins
ABS	Lgchem	RX710		Sheets for refrigerators, briefcases, bobbins
ABS	Lgchem	SH610A		Sheets for refrigerators, briefcases, bobbins
ABS	Lgchem	SH625		Sheets for refrigerators, briefcases, bobbins
ABS	Lgchem	LG703W		Automotives Interior Housing
ABS	Lgchem	LG704W		Automotives Interior Housing
ABS	Lgchem	LG709W		Automotives Interior Housing
ABS	Lgchem	LG713		Automotives Interior Housing
ABS	Lgchem	LG749W		Automotives Interior Housing
PS	Sabic	100	14	recommended for the manufacture of packaging items such as plastic boxes and typical applications include cutlery, tumblers, office stationery items, jewelry boxes, medical supplies or any clear injection molded items.
PS	Sabic	125	9	packaging items, namely jewelry and gift boxes; medical supplies such as Petri dishes, test tubes holders and specimen jars. It can also be used in capping the high impact polystyrene coextruded sheet for higher surface gloss and can be blended with impact modifier resin for clear packaging articles.
PS	Sabic	155	MFI: 5 at 5kg	General purpose
PS	Sabic	160	MFI: 3.3 at 5kg	foam extrusion for egg cartons, clam-shell and for building insulation boards. It is also recommended for cookie and cake trays that requires good organoleptics properties and can also be used for oriented polystyrene packaging products, artificial timber and light diffusers.
PS	Sabic	325	8	the injection molding of appliance parts, toys, furniture parts, containers, blow molded parts and structural foam applications.
PS	Sabic	330	4	extrusion and thermoforming applications. It can be used for food packaging and dairy products
PS	Ineos	2710	MFI: 5 at 5kg	Refrigerator liners for refrigerator inserts and door paneling Packaging applications for oily food and dairy products. Sheet extrusion application
PS	Ineos	495F	MFI: 9.5 at 5kg	Consumer electronics: LCD Back cover, TV-front and back cover, printer cabinets etc. Household: internal parts of vacuum cleaners; refrigerator parts etc. Large housing parts as well as filigree, shapely designs parts
PS	Ineos	456EB	MFI: 7 at 5kg	Bottle of yogurt Household
PS	Ineos	476L	MFI: 5.5 at 5kg	Wide range of injection molding applications , e.g. - office, kitchen and bathroom articles; Food packaging as beverage cups, packaging for dairy products, sheets and disposables Internal parts and housings of household appliances and consumer electronics Toys
PS	Ineos	495N	MFI: 9.5 at 5kg	Injection molding TV & office equipment components Air conditioners Water tanks for toilet flushing
PS	Ineos	576H	MFI: 5.5 at 5kg	Air conditioner housings Refrigerator inner parts Kitchen and bathroom articles, Toys a variety of uses in the electronics and electrical appliances
PS	Ineos	124N/L	MFI: 12 at 5kg	Blending with HIPS in FFS thermoformed cups Injection molded articles Petri dishes, cuvettes, pipettes
PS	Ineos	145D	MFI: 15 at 5kg	Artificial jewelry, household articles such as jars and cutlery In high speed high productivity molding applications such as thin walled containers, multicavity small moldings, stationery products like scales etc. Used as a coextruded gloss cap over HIPS Blends with high impact polystyrene Suitable for FFS-sheet
PS	Ineos	147F	MFI: 6.5 at 5kg	Transparent parts for refrigerators such as fruit and vegetable crispers, chillers, flaps, trays etc Stationery products like pen barrels, scales etc. Household applications such as crystalware, kitchen containers etc. Packaging applications such as chocolate boxes, display cabinets, etc. Other transparent articles in injection Molding applications
PS	Ineos	158K	MFI: 3 at 5kg	Replacement of SAN in several application like water filter containers, pen parts etc. Transparent sheet for Showcases & displays, consumer electronics, household application, photo frames, building material etc. Ideal material for physically or chemically foamed high-quality foamed articles, such as foam containers, labels or profiles (PSP / XPS) In blends with high impact polystyrene or Styrolux Injection molded articles
PS	Ineos	158N/L	MFI: 3.3 at 5kg	XPS Medical labware Blends with HIPS for increased heat stability
PS	Ineos	168N	MFI: 1.2 at 5kg	Foamed meat trays, foamed labels. In mixtures with high impact polystyrene for coffee cups, lids, etc. In mixtures with Styrolux for transparent, impact resistant cups, beakers and lids
PS	Ineos	168N/L	MFI: 1.5 at 5kg	Foam sheet for meat & fruit trays BOPS sheet
PS	GC Innoplus	THF77	8.4	Household Product , Food packaging, Toys, Sanitary ware , Electrical appliances
PS	GC Innoplus	THH102	2.6	High heat resistant,Household product , Toys, Sanitary ware , Electrical parts ; Refrigerator food tray
PS	GC Innoplus	THH103	1.7	High heat resistant,Household product , Vacuum foam sheet, Food packaging , Toys, Sanitary ware
PS	GC Innoplus	H350	3.5	High Impact,Household product , Toys, Sanitary ware , Electrical parts
PS	GC Innoplus	H950	3	High gloss grade for electrical appliances , Printers , Toys , Sanitary ware
PS	GC Innoplus	H350E	2.6	High Impact,Household product , Vacuum sheet, Food packaging , Toys, Sanitary ware , Electrical parts
PS	Total	940E	2.8	Cups, food packaging Custom sheet and coextrusion applications Specialty injection appliance and electronic applications
PS	Total	975E	2.8	Dairy ESCR application Hot drink lids Lithographic printing Refrigeration liners
PS	Total	825E	3	Custom sheet extrusion Extrusion thermoforming Packaging applications Form � Fill � Seal applications
PS	Total	844E	3	This low gloss resin is an excellent choice for printing and thermoforming applications. The impact and tensile properties are preferred in deep draw and thermoforming applications.
PS	Total	845E	3	This low gloss resin is an excellent choice for printing and thermoforming applications. The impact and tensile properties are preferred in deep draw and thermoforming applications.
PS	Total	945E	3.5	Custom sheet extrusion Deep draw thermoforming ABS replacement Super high gloss high impact applications
PS	Total	960E	3.8	Disposables requiring high ESCR Refrigeration liners Capping applications
PS	Total	740	4	Food service disposables such as lids, cups, and portion cup containers. Injection molding applications requiring high gloss.
PS	Total	825	8	Appliance housings Housewares and toys Structural foam Refrigeration applications
PS	Total	830	13	Thin wall injection molding Textile spools Medical applications Excellent color concentrate carrier resin
PS	Total	585	1.6	Foam disposables Insulation foam board OPS disposables
PS	Total	595T	1.6	Foam disposables Foam graphic art board Insulation foam board OPS disposables
PS	Total	529	3.5	Electronics Office accessories Appliance components
PS	Total	535	4	Electronics packaging Cutlery Office accessories Medical Appliance components
PS	Total	536	8.5	Foam board Wood replacement
PS	Total	524B	9	High gloss coextrusion capping Blending crystal
PS	Total	525	9	Cutlery Coextrusion capping Medical applications
PS	Total	523	11	Loose fill packaging Foam board Insulation board
PS	Total	500	14	Cutlery, tumblers, and containers Gloss capping material Blending crystal Masterbatch carrier
PP Other	IRPC	�1102H	2	Blow Molding : bottle Mono-filament / Yarn : rope, stretch tape, coarse textile for woven bag Sheet Extrusion : corrugate sheet, thermoforming cup, sheet for stationary Injection Molding : industrial crate
PP Other	IRPC	1103H	2	Blow Molding : Bottle Sheet Extrusion : Corrugate sheet, Thermoforming cup, Sheet for stationary
PP Other	IRPC	1140H	2.3	Sheet Extrusion : Thermoforming container and cups Blow Molding : fruit juice containers and bottles
PP Other	IRPC	1150H	2	Blow Molding : Bottle Sheet Extrusion: Thermoformed cup and food container, microwavable packaging
PP Other	IRPC	B1101	0.9	Extrusion: bottles, meat & product trays, refrigerator parts, sheet and strapping, etc.
PP Other	APC	Advanced-PP 1151K	3	Thermoformed packaging for e.g. dairy products & desserts and products requiring high clairity.
PP Other	Reliance	H110FG	9	Staple fibres for thermal bonded & needle punched nonwovens; High tenacity filament yarns.
PP Other	Formosa	Formolene��5100H	1.2	Homopolymer for Strapping
PP Other	Formosa	Formolene��5100I	0.7	Homopolymer for Compounding and Extrusion Applications
PP Other	Formosa	Formolene��5100J	0.5	Homopolymer for Compounding and Extrusion Applications
PP Other	Formosa	Formolene��5143C	2.1	Homopolymer for Extrusion Sheet and Thermoforming Applications
PP Other	Formosa	Formolene��5143H	2.1	Homopolymer for Extrusion Sheet and Thermoforming Applications
PP Other	Formosa	Formolene��5143N	3.2	Homopolymer for Extrusion Sheet and Thermoforming Applications
PP Other	Formosa	Formolene��6600A	0.5	Impact Copolymer for Extrusion and Compounding Applications (Fractional Melt Flow)
PP Other	Formosa	Formolene��3302B	2	Random Copolymer for Extrusion and Thermoforming Applications
PP Other	Formosa	Formolene��3310Z	10	Random Copolymer for Extrusion Applications
PP Other	Formosa	Formolene��3507Z	7	Random Copolymer for Film and Extrusion Sheet Applications
PP Other	Sabic	505P	2	typically used in dairy, flower pots, yellow fats and disposables plates and cups
PP Other	Sabic	504P	3.2	specially developed for producing stretched tapes with the following features: Consistent processability; Easy orientation; Low water carry over; Good mechanical properties
PP Other	Sabic	501P	1	typically used (by our customers) for extrusion of tapes and strapping
PP Other	Sabic	506P	4.8	intended for producing low denier stretched tapes with the following features: Consistent processability; Good process ability at high line speeds and low deniers; Low tapes shrinkage; Low water carry over; Very good mechanical properties.
PP Film	SCG	P600F	10	Food packaging
PP Film	SCG	P600FS	12	Water-quenched blown film for thin packaging (<20 micron)
PP Film	SCG	P602F	10	Food packaging, Display bag such as garment or souvenir etc. (> 100 micron)
PP Film	IRPC	1120NK	11	Film Extrusion : High clarity film bag
PP Film	IRPC	1125NA	11	packaging film, shopping film bag and film for lamination
PP Film	IRPC	1126NK	11	food packaging, shopping film bag
PP Film	IRPC	F1004	3.5	Film applications : General film, BOPP film
PP Film	APC	Advanced-PP 1104H	2	Core layer in metallisable and general BOPP Film (stenter process), Raffia for FIBC applications
PP Film	APC	Advanced-PP 1104K	3.2	Metallisable BOPP film
PP Film	Braskem	FF030F2	3	BOPP film
PP Film	Reliance	H034SG	3.4	Plain and metallisable BOPP films
PP Film	Formosa	Formolene��1102K	3	BOPP film
PP Film	Formosa	Formolene��1102KR	4	BOPP film
PP Film	Formosa	Formolene��1102L	5	extrusion processes, notably slit tape
PP Film	Formosa	Formolene��1202K	3	biaxially oriented film (BOPP)
PP Film	Formosa	Formolene��1203K	3	biaxially oriented film (BOPP)
PP Film	Formosa	Formolene��2502A	1.5	Impact Copolymer for Extrusion Applications
PP Film	Formosa	Formolene��6501A	0.7	Impact Copolymer for Extrusion Applications (Fractional Melt Flow)
PP Film	Formosa	Formolene��6502A	1.5	Impact Copolymer for Extrusion Applications
PP Film	Formosa	Formolene��3507Z	7	Random Copolymer for Film and Extrusion Sheet Applications
PP Film	Total	3371	2.8	Biorented film, BOPP
PP Film	Total	3272	2.2	Biorented film, BOPP
PP Film	Total	3273	2	Biorented film, BOPP
PP Film	Total	3270	2	Biorented film, BOPP
PP Film	Total	Z9450	5	CPP Film
PP Film	Total	7450HC	5	CPP Film
PP Film	Total	8573	6.8	CPP Film
PP Film	Total	M6571	9	Cast film, Stretch wrap
PP Film	Total	M9675	11	Bioriented Film, BOPP
PP Film	Total	M8670	12	Biorented film, BOPP, Cast film
PP Injection	SCG	P403J	3.5	Fruit basket, Household product, Office accessory, Food container, Infant article, Furniture
PP Injection	SCG	P700J	12	Household product, toys,office accessory, food container, infant article, fruit basket
PP Injection	SCG	P701J	12	Household product, Toys, Office accessory, Food container, Infant article, Furniture
PP Injection	SCG	P702J	12	Household product, Toys, Food container
PP Injection	SCG	P705JM	12	Syringe plunger, Specimen cup, Applications required high stiffness, Blister packs for contact lens
PP Injection	SCG	P901J	60	Thin wall food and beverage packaging; - Food containers with high stiffness - Drinking cups with high clarity General thin wall products Housewares
PP Injection	SCG	P440J	5	High impact and durable automotive interior parts; electrical appliance components such as fan stand, base and topcover of washng machine; industrial containers such as crate, pails and toolboxes
PP Injection	SCG	P441JU	5	High impact and durable automotive interior parts and electrical appliance components such as fan stand, base and topcover of washng machine and pellet outdoor parts that require long service life Pail, crates, industrial uses, automotive and electrical appliance parts, any parts requiring outdoor use
PP Injection	SCG	P443J	6	Caps and closures for carbonated soft drink and hot-filled beverages
PP Injection	SCG	P483JU	5	Returnable Transport Packaging such as Pallet, Crate and container, Automotive parts, Electrical appliance parts, Any parts require outdoor uses agent
PP Injection	SCG	P640J	10	High impact and durable automotive interior parts; and electrical appliance components such as fan stand, cabinet, spinning tub of wahing machine
PP Injection	SCG	P642J	10	Industrial and household product with combined need of high stiffness and toughness. Electrical appliance parts such as spinning tub, pulsator and balance ring of wahing machine, automotive and motorcycle interior parts, and battery case Washing machine parts such as tub, base, panel, industrial uses, automotive and electrical appliance parts, furniture
PP Injection	SCG	P655IM	7	Saline solution bottle, Medical devices, Laboratory wares,Applications produced by ISBM process
PP Injection	SCG	P667J	10	Pail, Crates, Industrial uses, Luggage, Container, Furniture, Automotive parts , Electrical appliance parts.
PP Injection	SCG	P686J	10	Pail, crate, container Automotive parts Electrical appliance parts Industrial parts
PP Injection	SCG	P722JO	10	Automotive battery cases, automotive and electrical appliance parts, industrial uses
PP Injection	SCG	P740J	27	Industrial applications that require good flowability such as complex automotive parts, automotive trim, electrical appliance parts such as toptable of refrigerator and cabinet of washing machine Automotive and electrical appliance parts, complicated Industrial parts, any parts requiring good flowability
PP Injection	SCG	P744J	30	Electrical appliance parts mainly for refrigerator parts, cover base of vacuum conditioner and cabinet of washing machine.
PP Injection	SCG	P750J	12	Clear food container, Clear household product, Articles required high transparency
PP Injection	SCG	P840J	43	Automotive, motorcycle and electrical appliance parts that require good flowability such as cabinet and outer tub of washing machine
PP Injection	SCG	P841J	40	Automotive, motorcycle and electrical appliance parts that require good flowability such as cabinet and outer tub of washing machine
PP Injection	SCG	P842J	40	Electrical appliance parts mainly for refrigerator parts and washing machine parts such as outer tub, cabinet and control panel
PP Injection	SCG	P851JO	-	Clear food container, Clear household product, Household product, Articles required high transparency
PP Injection	IRPC	100NK	11	production of general part, long path and thin wall, such as house-ware, closure, food container and etc
PP Injection	IRPC	1100NN	11	production of general part, long path and thin wall. Typical applications are house-ware, closure, food container
PP Injection	IRPC	1100PK	15	Injection Molding : house-ware, thin wall product, food container and etc. Multi-filament : belt, fiber for carpet and etc.
PP Injection	IRPC	K1111	11	Injection Molding: Thin wall parts, Housewares, Automotive parts, Appliance
PP Injection	APC	Advanced-PP 1100N	12	Closures, furniture, houseware, general IM
PP Injection	APC	Advanced-PP 1100R	24	Housewares, caps & closures, thin wall items compounding.
PP Injection	Braskem	PM47N	4.7	Carpet backing, High stiffness parts for furniture , Home appliances, Hot fill packaging , Thermoformed and Disposable Packaging
PP Injection	Braskem	HP 648S	40	Caps, Home appliances, Thin wall houseware, Thin wall packaging
PP Injection	Formosa	Formolene��4100N	12	Injection molding
PP Injection	Formosa	Formolene��4100P	20	injection molding applications including closures, small appliances, housewares and toys
PP Injection	Formosa	Formolene��4100T	35	injection molded applications such as closures, small appliances, housewares and toys
PP Injection	Formosa	Formolene� 4100T/ISO Format	35	injection molded applications such as closures, small appliances, housewares and toys
PP Injection	Formosa	Formolene��4140T	35	Homopolymer for Automotive, Appliance and Compounding Applications
PP Injection	Formosa	Formolene��4141T	35	Homopolymer for Automotive, Appliance and Compounding Applications
PP Injection	Formosa	Formolene��4142N	12	Homopolymer for Injection Molded Applications
PP Injection	Formosa	Formolene��4142R	20	Homopolymer for Injection Molded Applications
PP Injection	Formosa	Formolene��4142T	35	Homopolymer for Injection Molded Applications
PP Injection	Formosa	Formolene��4143T	35	Homopolymer for Injection Molded Applications
PP Injection	Formosa	Formolene��5140H	2.1	Homopolymer for Compression Molded Caps and Closures
PP Injection	Formosa	Formolene��5140N	12	Homopolymer for Injection Molded Applications
PP Injection	Formosa	Formolene��5144H	2	Homopolymer for Appliance Applications
PP Injection	Formosa	Formolene��5144L	5	Homopolymer for Injection Molded Applications requiring Heat Resistance
PP Injection	Formosa	Formolene��2306N	6	Impact Copolymer for Compression and Injection Molded Caps and Closures
PP Injection	Formosa	Formolene��2315N	15	Impact Copolymer for Injection Molding Applications Requiring Stiffness
PP Injection	Formosa	Formolene��2510A	10	Medium Impact Copolymer for Injection Molding
PP Injection	Formosa	Formolene��2520A	20	Medium Impact Copolymer for Injection Applications
PP Injection	Formosa	Formolene��2520A	20	Medium Impact Copolymer for Injection Applications
PP Injection	Formosa	Formolene��2520N	20	Impact Copolymer for Injection Molding
PP Injection	Formosa	Formolene��2535A	35	Impact Copolymer for Thin Walled Injection Molded Applications
PP Injection	Formosa	Formolene��2550A	50	Impact Copolymer for Thin Walled Injection Molded Applications
PP Injection	Formosa	Formolene��2575N	75	Impact Copolymer for High Speed injection Molded Applications
PP Injection	Formosa	Formolene��2610A	10	Impact Copolymer for Compounding and Injection Molded Applications
PP Injection	Formosa	Formolene��2613N	13	Copolymer for Injection Molded Applications Requiring a Combination of High Toughness and Stiffness
PP Injection	Formosa	Formolene��2620A	20	Impact Copolymer for Compounding and Injection Molded Applications
PP Injection	Formosa	Formolene��2706N	6	Copolymer for Heavy Duty Injection Molded Applications
PP Injection	Formosa	Formolene��2730N	30	Impact Copolymer for Injection Molding Applications
PP Injection	Formosa	Formolene��6145O	20	Impact Copolymer for Appliance Applications
PP Injection	Formosa	Formolene��6335N	35	Impact Copolymer - Designed to Meet the Physical Requirements of Automotive Interior Trim
PP Injection	Formosa	Formolene��6375N	75	Impact Copolymer for High Speed Injection Molded Applications
PP Injection	Formosa	Formolene��6507N	7	Impact Copolymer for Injection Molding
PP Injection	Formosa	Formolene��6510A	10	Impact Copolymer for Injection Molding
PP Injection	Formosa	Formolene��6510E	10	Impact Copolymer for General Purpose Injection Applications
PP Injection	Formosa	Formolene��6520A	20	Impact Copolymer for Injection Molding
PP Injection	Formosa	Formolene��6520N	20	Impact Copolymer for Injection Molding
PP Injection	Formosa	Formolene��6530N	30	Impact Copolymer - Designed to Meet Above the Shoulder Requirements of Automotive Interiors.
PP Injection	Formosa	Formolene��6535A	35	Impact Copolymer for Thin Walled Injection Molded Applications
PP Injection	Formosa	Formolene��6535N	35	Impact Copolymer - Designed to Meet the Physical Requirements of Automotive Interior Trim
PP Injection	Formosa	Formolene� 6535N-ISO	35	Impact Copolymer Designed to Meet the Requirement of Automotive Interior Trim
PP Injection	Formosa	Formolene��6550A	50	Impact Copolymer for Thin Walled Injection Molded Applications
PP Injection	Formosa	Formolene��6575N	75	Impact Copolymer for High Speed injection Molded Applications
PP Injection	Formosa	Formolene��6610A	10	Impact Copolymer for Compounding and Injection Molded Applications
PP Injection	Formosa	Formolene��6613N	12	Copolymer for Injection Molded Applications Requiring a Combination of High Toughness and Stiffness
PP Injection	Formosa	Formolene��6620A	20	High Impact Copolymer for Injection Molding
PP Injection	Formosa	Formolene��6630A	30	Impact Copolymer for Injection Molding Applications
PP Injection	Formosa	Formolene��6730J	30	Impact Copolymer for Injection and Compounding Applications
PP Injection	Formosa	Formolene��6730L	30	Impact Copolymer for Injection and Compounding Applications
PP Injection	Formosa	Formolene��3312B	12	Random Copolymer for Clear Storage Containers and Food and Beverage Containers
PP Injection	Formosa	Formolene��3312E	12	Random Copolymer for Clear Storage Containers and Food and Beverage Containers
PP Injection	Formosa	Formolene��3335E	35	Random Copolymer for Clear Storage Containers and Food and Beverage Containers
PP Injection	Formosa	Formolene��3355E	55	Random Copolymer for Clear Storage Containers and Food and Beverage Containers
PP Injection	Formosa	Formolene��3355O	55	Random Copolymer for Clear Storage Containers and Food and Beverage Containers
PP Injection	Formosa	Formolene��3380E	80	Random Copolymer for Clear Storage Containers and Food and Beverage Containers
PP Injection	Formosa	Formolene��3435E	35	Random Copolymer for Clear Storage Containers and Food and Beverage Containers
PP Injection	Sabic	412MK49	45	specially developed for producing injection molded articles. This grade contains nucleating and antistatic agents. It has high flow properties and excellent impact � stiffness balance.
PP Injection	Sabic	412MN40	37	a multi-purpose grade with good flow properties, combining stiffness and good balance in impact strength. The material has a very low tendency for warpage and is typically used for the production of thin wall packaging articles
PP Injection	Sabic	413MNK45	70	controlled rheology PP grade with a very high fluidity. It is provided with an antistatic and nucleating agent package. This grade has a good impact � stiffness balance
PP Injection	Sabic	46MNK45	6	a phthalate free polypropylene impact copolymer grade suitable for both injection and compression molding of beverage closures
PP Injection	Sabic	48M10	15	It is typically used for articles with complex shapes, such as crates and boxes, rigid packaging and components for the automotive and electro-technical industries
PP Injection	Sabic	48M40	15	It is typically used for articles with complex shapes, such as crates and boxes, rigid packaging and components for the automotive and electro-technical industries
PP Injection	Sabic	49MK45	21	specially developed for producing injection molded articles. This grade contains nucleating & antistatic agents. It has medium flow properties and excellent impact - stiffness balance
PP Injection	Sabic	500P	3.1	medium flow, multipurpose grade for extrusion and injection molding applications
PP Injection	Sabic	511MK40T	29	high fluidity polypropylene impact copolymer with high stiffness and medium impact strength. It contains nucleating & antistatic agents
PP Injection	Sabic	PP 512A	25	a controlled rheology grade with narrow molecular weight distribution intended for general purpose applications such as woven sacks lamination and injection molding
PP Injection	Sabic	PP 512MN10	37	It is widely used in articles where good processability, high toughness and a low warpage are required, e.g. vacuum-cleaner housings, large size flower pots, foodstuff containers and ice-cream containers
PP Injection	Sabic	513MN40	70	a controlled rheology PP grade with very high fluidity. It contains an antistatic agent and especially developed for producing injection molded articles.
PP Injection	Sabic	513MNK40T	60	a very high fluidity polypropylene impact copolymer with high stiffness and medium impact strength. It contains nucleating & antistatic agents.
PP Injection	Sabic	PP 56M10	6.2	It is typically used in a variety of applications e.g. containers and crates & boxes. It is also used in automotive components, like for example battery cases.
PP Injection	Sabic	56M65	7	specially developed for producing injection molded articles requiring a good resistance to long term heat exposure
PP Injection	Total	3620WZ	12	injection molding applications including closures, small appliances, housewares and toys
PP Injection	Total	M6823MZ	30	Random Copolymer Polypropylene
PP Injection	Total	4170	0.8	Melt strength with excellent impact properties
PP Injection	Total	4252	1.5	High melt strength
PP Injection	Total	4481WZ	4	Good stiffness-impact balance coupled with high creep resistance
PP Injection	Total	4524WZ	7	injection molding of baskets, pails, toys and any articles requiring extra
PP Injection	Total	5571	7	cast film applications
PP Injection	Total	5624WZ	15	Designed for applications requiring extra toughness
PP Injection	Total	5720WZ	20	crates, pails, and other heavy duty articles
PP Injection	Total	4720WZ	25	garden furniture, housewares and thin-walled articles.
PP Injection	Total	4740WZ	25	the injection molding of garden furniture, housewares and thin-walled articles
PP Injection	Total	4820WZ	35	garden furniture, housewares, thin-walled articles, and compounding.
PP Injection	Total	5824WZ	40	Excellent stiffness and impact resistance, combined with low warpage
PP Injection	Total	4944CWZ	50	thin-walled packaging containers and household articles
PP Injection	Total	5946WZ	75	thin�walled�articles�and�compounding
PP Injection	Total	5948WZ	80	injection molding of thin-walled packaging containers and household articles
PP Yarn	SCG	P303S	2	Dairy cups, disposable drinking cups, food containers for microwave heating
PP Yarn	SCG	P400S	3.5	Woven bags,Flexible Intermediate Bulk Containers ,Ropes & twines, Sheet, Strap, Straw
PP Yarn	SCG	P401S	2.5	Woven bags, Flexible Intermediate Bulk Containers , Ropes & twines, Geotextiles , Tarpaulin, Sheet and Thermoforming
PP Yarn	SCG	P403J	3.5	Fruit basket, Household product, Office accessory, Food container, Infant article, Furniture
PP Yarn	IRPC	�1032L	5	Mono-filament / Yarn : Rope, stretch tape, coarse textile for woven bag and tarpaulin Extrusion : Straw, sheet, industrial board
PP Yarn	IRPC	�1102H	2	Blow Molding : bottle Mono-filament / Yarn : rope, stretch tape, coarse textile for woven bag Sheet Extrusion : corrugate sheet, thermoforming cup, sheet for stationary Injection Molding : industrial crate
PP Yarn	IRPC	�1102K	4	Mono-filament / Yarn : rope, stretch tape, coarse textile for woven bag and tarpaulin Extrusion : straw, sheet, industrial board
PP Yarn	IRPC	1202J	3	Mono-filament / Yarn : rope, stretch tape, coarse textile for woven bag and tarpaulin Extrusion : straw, sheet, industrial board
PP Yarn	IRPC	S1003	3.5	Extrusion : Monofilament, tape or flat yarn
PP Yarn	APC	Advanced-PP 1102K	3.4	Raffia, monofilament, Thermoforming, strapping
PP Yarn	APC	Advanced-PP 1102LQ	4.5	Suitable for high speed tape (raffia) production and thermoforming applications, Carpet Backing Yarn.
PP Yarn	APC	Advanced-PP 1102L	5	Suitable for high speed tape (raffia) production and thermoforming applications, Carpet Backing Yarn.
PP Yarn	APC	Advanced-PP 1032 LC	5	Very high line speed raffia/Tape production.
PP Yarn	APC	Advanced-PP 1102J	2.4	Raffia, sheets & thermoforimg applications.
PP Yarn	APC	Advanced-PP 1101SC	35	Spun bond nonwovens for hygiene & technical applications
PP Yarn	APC	Advanced-PP 1101R	24	BCF/CF, fine denier staple and nonwovens (NW) used in hygiene applications
PP Yarn	APC	Advanced-PP 1101S	24	Designed for CF/BCF yarn for carpet
PP Yarn	APC	Advanced-PP 1101P	18	CF/BCF high denier & low line speeds, stapple fibre
PP Yarn	Braskem	H 503	3.5	Broom bristles, Brush bristles, Compounds, Fishing net, Flip-Top caps, Home appliances, Lashing cables
PP Yarn	Braskem	H 502HC	3.3	Carpet backing, Cups, Disposable plates, High stiffness articles, Home appliances, Hot fill packaging
PP Yarn	Braskem	H 503HS	4	Broom bristles, Brush bristles, Fishing net, Lashing cables, Ropes
PP Yarn	Braskem	H 611	2.1	Big Bags, Building shade fabrics, Curtains and covers to aviary and agriculture, Geotextiles
PP Yarn	Braskem	H 614	2.1	Big Bags, Building shade fabrics, Curtains and covers to aviary and agriculture, Geotextiles
PP Yarn	Braskem	PM47N	4.7	Carpet backing, High stiffness parts for furniture , Home appliances, Hot fill packaging , Thermoformed and Disposable Packaging
PP Yarn	Reliance	H030SG	3.4	Woven Fabric, sacks and monofilaments
PP Yarn	Formosa	Formolene��1104KR	4.3	raffia application
PP Yarn	Formosa	Formolene��4101O	19	multifilament and bulk continuous filament fiber
PP Yarn	Formosa	Formolene��4111T	35	Homopolymer for Non-Wovens and Extrusion Coating
PP Yarn	Formosa	Formolene��5101M	8	Homopolymer for Staple Fiber
PP Yarn	Formosa	Formolene��5102KR	4	Homopolymer for Raffia
PP Yarn	Lyondell Basell	Moplen HP400K	4	BOPP, raffia, rope
PP Yarn	Lyondell Basell	Moplen HP450J	3.3	BOPP, raffia, rope
PP Yarn	Lyondell Basell	Moplen HP452J	3.4	BOPP, raffia, rope
PP Yarn	Lyondell Basell	Moplen HP462R	25	BOPP, raffia, rope
PP Yarn	Lyondell Basell	Moplen HP462S	36	BOPP, raffia, rope
PP Yarn	Lyondell Basell	Moplen HP551R	25	BOPP, raffia, rope
PP Yarn	Lyondell Basell	Moplen HP552K	4	BOPP, raffia, rope
PP Yarn	Lyondell Basell	Moplen HP552L	6	BOPP, raffia, rope
PP Yarn	Lyondell Basell	Moplen HP552N	13	BOPP, raffia, rope
PP Yarn	Lyondell Basell	Moplen HP552R	25	BOPP, raffia, rope
PP Yarn	Lyondell Basell	Circulen HP456J	3.4	BOPP, raffia, rope
PP Yarn	Lyondell Basell	Moplen HP400K	4	BOPP, raffia, rope
PP Yarn	Lyondell Basell	Moplen HP450H	1.8	BOPP, raffia, rope
PP Yarn	Lyondell Basell	Moplen HP450J	3.3	BOPP, raffia, rope
PP Yarn	Lyondell Basell	Moplen HP456H	1.8	BOPP, raffia, rope
PP Yarn	Lyondell Basell	Moplen HP520H	2	BOPP, raffia, rope
PP Yarn	Lyondell Basell	Moplen HP550J	3	BOPP, raffia, rope
PP Yarn	Lyondell Basell	Moplen HP565K	3.5	BOPP, raffia, rope
PP Yarn	Lyondell Basell	Pro-fax 6523	4	BOPP, raffia, rope
PP Yarn	Lyondell Basell	Pro-Fax HP553J	3.5	BOPP, raffia, rope
PP Yarn	Sabic	504P	3.2	specially developed for producing stretched tapes with the following features: Consistent processability; Easy orientation; Low water carry over; Good mechanical properties
PP Yarn	Sabic	511A	25	spun bond and continuous filament spinning resulting in excellent non woven tensile properties
PP Yarn	Sabic	513A	6	fibre grade with an anti gas fading stabiliser package.Application:SABIC� PP 513A is typically used by our customer for extrusion of staple fibres used in geo-textile applications with an optimum balance of tenacity/elongation
PP Yarn	Sabic	516A	4.8	specially designed for fiber extrusion applications with the following features: Consistent processability; Good thread line stability; Good color consistency; Good gas fading resistance.
PP Yarn	Sabic	518A	25	PP homopolymer grade with broad molecular weight distribution intended for fiber extrusion applications
PP Yarn	Sabic	518P	25	PP homopolymer grade with broad molecular weight distribution intended for fiber extrusion applications
PP Yarn	Sabic	519A	35	a polypropylene homopolymer resin specifically designed to enable optimised production speed of very fine filament titre resulting in an excellent balance of mechanical properties and softness
PP Yarn	Total	3462	4.1	Tape/Monofilament Extrusion
PP Yarn	Total	3568	8	(Bulk) Continuous Fiber Extrusion, Fiber extrusion
PP Yarn	BSR	T3034	3.4	raffia application
MDPE	Dow	7072	MI: 0.32	blown film applications, shrink films
MDPE	Dow	NG6995	MI: 0.38 at 5kg	blown film application, monolayer and mutilayer film, general purpose bags
MDPE	Dow	NG6895	MI: 0.38 at 5kg	Blown film
MDPE	Dow	7525	MI: 22	thin-wall micro -irrigation and profile extrustion application
MDPE	Dow	NG6993R	MI: 16
MDPE	Dow	8818	MI: 17	pipes for water distribution, irrigation, effluents, ducts for telecommunications, geomembranes, telephone cable shells, drop wires.
MDPE	Dow	DPDA-3135	MI: 3.5	injection molding, intermediate bulk containers, toys, general purpose customs molding, agricultural storage tanks, water tanks, marine parts, indoor consumer article
MDPE	Dow	DPDA-3152	MI: 5.2	Rational molding or injection molding, for intermediate bulk containers, toys, general purpose custom molding, agricultural storage tanks, water tanks, marine parts, indoor consumer articles.
MDPE	Dow	DMDA-8962	MI: 62	good impacts / stiffness balance for freezer applications
MDPE	Chevron Philips (Marlex)	TR131	0.2	bags, shopping bags, trash bags
MDPE	Chevron Philips (Marlex)	TR - 130	0.3	Retail bags � Industrial liners � Mailer bags � Blend component
MDPE	SCG	M545WC	0.7	� Jacketing of power cables � Jacketing of fiber optic cables
MDPE	Chevron Philips (Marlex)	TR-935	6	Recreational and agricultural equipment ? Toys and carts
MDPE	Chevron Philips (Marlex)	TR-938	3	Industrial waste containers and tanks ? Marine equipment ? Industrial tanks
MDPE	Ineos	BPD4020	MI: 0.2	extrusion of jackets of power and telecommunication cable
MDPE	Ineos	BPD4035	MI: 0.2	compound designed for cable jacketing
PVC Other	OxyVinyls	OxyVinyls �155	�K-Value: 50	High flow molding compounds, alloys and polyblends, color concentrates and master batches, flow enhancement, flexible and rigid foams
PVC Other	OxyVinyls	OxyVinyls 155F	K-Value: 50	High flow molding compounds, alloys and polyblends, color concentrates and master batches, flow enhancement, flexible and rigid foams
PVC Other	OxyVinyls	OxyVinyls 255	K-Value: 73	Flexible profile extrusion, wire and cable, calendered goods
PVC Other	OxyVinyls	OxyVinyls 280	K-Value: 78	High-strength calendered goods, alloys
PVC Other	OxyVinyls	OxyVinyls 310	K-Value: 82	Very high-strength calendered goods, alloys, specialty wire and cable
PVC Other	OxyVinyls	OxyVinyls 355	K-Value: 88	Very high-strength calendered goods, alloys, flexible materials with outstanding physicals
PVC Other	OxyVinyls	OxyVinyls 450F	K-Value: 67	Medical film and tubing, calendering, flexible injection molding
PVC Other	OxyVinyls	OxyVinyls 500F	K-Value: 71	Medical film and tubing, calendered goods
PVC Pipe	SCG	SG660	K-Value: 66	Transparent Sheet, Floor Covering, Agriculture Sheet, Artificial Leather, Other Flexible Film and Sheets., Rigid Pipe, Electrical Wire and Cable, Flexible Hose, Stretch Film, Other Rigid and Soft Profiles., Electrical Plug, Shoe, Toy, Other Rigid and Flexible Products.
PVC Pipe	SCG	SG66J	K-Value: 66.1	Transparent Sheet, Floor Covering, Agriculture Sheet, Artificial Leather, Other Flexible Film and Sheets., Rigid Pipe, Electrical Wire and Cable, Flexible Hose, Stretch Film, Other Rigid and Soft Profiles., Electrical Plug, Shoe, Toy, Other Rigid and Flexible Products
PVC Pipe	SCG	SG66Z	K-Value: 66.1	Transparent Sheet, Electrical Taper, Artificial Leather, Other Flexible, Films and Sheets, Furniture and Automotive Trim, Flexible Hose, Electrical Wire and Cable, Stretch Film, Other Rigid and Soft Profiles., Toy, Other Rigid and Flexible Products.
PVC Pipe	SCG	SG710	K-Value: 71.3	Inflatable Toy, Electrical Taper, Artificial Leather, Other Flexible Film and Sheets., Furniture Trim, Electrical Wire and Cable, Flexible Hose, Other Soft Profiles., Toy, Other Soft Products.
PVC Pipe	CGPC	H-58	K-Value: 58	Injection Moulding (Fitting), Blowing Moulding (Bottle).
PVC Pipe	CGPC	H-61	K-Value: 61	Injection Moulding (Pipe Fitting), Hollow-vacuum Forming (Bottle Blowing), Rigid Film, Shrinkable Film.
PVC Pipe	CGPC	H-66	K-Value: 66	Soft and Semi-rigid Product For General Purpose (PVC Film, Sheet, Beach Chair, Venetian Blind), Rigid Pipe, Hose, Wire and Cable Insulation.
PVC Pipe	CGPC	H-73	K-Value: 73	High Impact Flexible Products (PVC Leather, Film, Furniture, Shoes), High Impact Sheet, High Voltage Wire and Cable Insulation.
PVC Pipe	CGPC	H-80	K-Value: 80	High Impact Flexible Products (PVC Leather, Film, Furniture, Shoes), High Impact Sheet, High Voltage Wire and Cable Insulation.
PVC Pipe	Westlake	2055	K-Value: 51	Injection Molded Products
PVC Pipe	Westlake	2060	K-Value: 53	Injection and Blow Molded Products
PVC Pipe	Westlake	1185	K-Value: 56	Blow Molded Bottles, Injection Molded Fittings
PVC Pipe	Westlake	5265	K-Value: 57	Injection and Blow Molded Products, Extruded Sheet, Bottles, Fittings
PVC Pipe	Westlake	2070	K-Value: 57	Injection and Blow Molded Products, Extruded Sheet, Bottles, Fittings
PVC Pipe	Westlake	1195	K-Value: 58	Blow Molded Bottles, Injection Molded Fittings
PVC Pipe	Westlake	1230P	K-Value: 65	Pipe, Tube, and Conduit Products
PVC Pipe	Westlake	1230S	K-Value: 66	Siding, Window, Fence, and Door Products
PVC Pipe	Westlake	1091	K-Value: 65	Pipe, Siding, Window, Door, and Fence Lineal Products
PVC Pipe	Westlake	5385	K-Value: 65	Pipe, Siding, Window, Door, and Fence Lineal Products
PVC Pipe	OxyVinyls	OxyVinyls �185	K-Value: 56	Pipe fittings, injection molding,�flooring, solid and foam profile extrusion
PVC Pipe	OxyVinyls	OxyVinyls 185F	K-Value: 56	Clear extruded film and sheet,�calendering, injection molding, solution top coats
PVC Pipe	OxyVinyls	OxyVinyls 190F	K-Value: 58	Calendering, rigid film and sheet, profile extrusion, extruded�foam
PVC Pipe	OxyVinyls	OxyVinyls 195F	K-Value: 60	Calendering, rigid film and sheet, profile extrusion, extruded foam
PVC Pipe	OxyVinyls	OxyVinyls �225	K-Value: 65	Pipe extrusion
PVC Pipe	OxyVinyls	OxyVinyls 225P	K-Value: 65	Pipe extrusion
PVC Pipe	ASC	FJ-65 R	K-Value: 65	Garden Hose, General Tube
PVC Pipe	ASC	FJ-65 S	K-Value: 65	Garden Hose, General Tube
PVC Pipe	ASC	FJ-70	K-Value: 70	Garden Hose, General Tube
PVC Film	SCG	SG580	K-Value: 58	Floor tile , Pipe Fitting , Rigid Foam Sheet , Other Rigid Profiles, Other injection Products
PVC Film	SCG	SG58J	K-Value: 58.1	Floor tile , Pipe Fitting , Rigid Foam Sheet , Other Rigid Profiles, Other injection Products
PVC Film	Westlake	5305	K-Value: 59	Extruded or Calendered Sheet, Foam, or Rigid Profile Products
PVC Film	Westlake	2079	K-Value: 61	Extruded or Calendered Sheet, Foam, or Rigid Profile Products
PVC Film	Westlake	2082	K-Value: 62	Extruded or Calendered Sheet, Foam, or Flexible Profile Products
PVC Film	Westlake	2095	K-Value: 68	Extruded or Calendered Sheet, Blown Film, Cable Coating, or Flexible Products
PVC Film	Westlake	5395	K-Value: 68	Extruded or Calendered Sheet, Blown Film, Cable Coating, or Flexible Products
PVC Film	Westlake	2100	K-Value: 70	Extruded or Calendered Sheet, Blown Film, Cable Coating, or Flexible Products
PVC Film	Westlake	5415	K-Value: 70	Extruded or Calendered Sheet, Blown Film, Cable Coating, or Flexible Products
PVC Film	OxyVinyls	OxyVinyls 200F	K-Value: 61	Rigid and semi-rigid molding, film and sheeting, extruded profiles
PVC Film	OxyVinyls	OxyVinyls 216	K-Value: 64	Siding and window profile extrusion
PVC Film	OxyVinyls	OxyVinyls 216S	K-Value: 64	Siding and window profile extrusion
PVC Film	OxyVinyls	OxyVinyls 220F	K-Value: 65	Flexible film and tubing and flexible molded parts
PVC Film	OxyVinyls	OxyVinyls 226	K-Value: 67	Flexible film and sheet, extrusion, molding, wire and cable, calendering, automotive
PVC Film	OxyVinyls	OxyVinyls 226F	K-Value: 67	Flexible film and sheet,�extrusion, molding, wire and cable, calendering, automotive
PVC Film	OxyVinyls	OxyVinyls �240	K-Value: 70	Wire and cable, calendering, flexible molding and extrusion
PVC Film	OxyVinyls	OxyVinyls 240F	K-Value: 70	Flexible film, extrusion and molding, wire and cable, calendering, automotive
PVC Film	OxyVinyls	OxyVinyls 255F	K-Value: 73	Flexible profile extrusion, calendered goods, medical�film and sheet, medical tubing and molded parts
PVC Film	ASC	FJ-57	K-Value: 57	�Packaging, Building material, Vacuum molding, Records
PVC Film	ASC	FJ-60	K-Value: 60	�Packaging, Building material, Vacuum molding, Records
EVA	Hanwha	E181F		be processed in conventional kneading and rolling equipment for mixing and dispersing crosslinking agent and foaming agent
EVA	Exxon Mobil	Escorene Ultra AD 2528	%VA: 27.6	can be used in a variety of applications involving molding,
EVA	Exxon Mobil	Escorene Ultra LD 705.MJ Blown	%VA: 12.8	compounding, extrusion, adhesives, sealants, and wax blends.
EVA	Exxon Mobil	Escorene Ultra LD 705.MJ Molding	%VA: 12.8	compounding, extrusion, adhesives, sealants, and wax blends.
EVA	Exxon Mobil	Escorene Ultra LD 706.15 Cast	%VA: 14.9	compounding, extrusion, adhesives, sealants, and wax blends.
EVA	Exxon Mobil	Escorene Ultra LD 706.15 Molding	%VA: 14.9	compounding, extrusion, adhesives, sealants, and wax blends.
EVA	Exxon Mobil	Escorene Ultra LD 708 Series	%VA: 14.9	compounding, extrusion, adhesives, sealants, and wax blends.
EVA	Exxon Mobil	Escorene Ultra LD 713.93 Blown	%VA: 14.4	compounding, extrusion, adhesives, sealants, and wax blends.
EVA	Exxon Mobil	Escorene Ultra LD 713.93 Cast	%VA: 14.4	compounding, extrusion, adhesives, sealants, and wax blends.
EVA	Exxon Mobil	Escorene Ultra LD 713.93 Molding	%VA: 14.4	compounding, extrusion, adhesives, sealants, and wax blends.
EVA	Exxon Mobil	Escorene Ultra LD 720 Series	%VA: 18.5	compounding, extrusion, adhesives, sealants, and wax blends.
EVA	Exxon Mobil	Escorene Ultra LD 721.IK	%VA: 18.5	compounding, extrusion, adhesives, sealants, and wax blends.
EVA	Exxon Mobil	Escorene Ultra LD 723.28 Cast	%VA: 18.5	compounding, extrusion, adhesives, sealants, and wax blends.
EVA	Exxon Mobil	Escorene Ultra LD 723.28 Molding	%VA: 18.5	compounding, extrusion, adhesives, sealants, and wax blends.
EVA	Exxon Mobil	Escorene Ultra LD 726.07	%VA: 18	compounding, extrusion, adhesives, sealants, and wax blends.
EVA	Exxon Mobil	Escorene Ultra LD 727.22	%VA: 18	compounding, extrusion, adhesives, sealants, and wax blends.
EVA	Exxon Mobil	Escorene Ultra LD 728 Series	%VA: 18.2	compounding, extrusion, adhesives, sealants, and wax blends.
EVA	Exxon Mobil	Escorene Ultra LD 730 Series Blown	%VA: 17.2	compounding, extrusion, adhesives, sealants, and wax blends.
EVA	Exxon Mobil	Escorene Ultra LD 730 Series Molding	%VA: 17.2	compounding, extrusion, adhesives, sealants, and wax blends.
EVA	Exxon Mobil	Escorene Ultra LD 755 Series	%VA: 27.6	compounding, extrusion, adhesives, sealants, and wax blends.
EVA	Exxon Mobil	Escorene Ultra LD 761.36	%VA: 26.7	compounding, extrusion, adhesives, sealants, and wax blends.
EVA	DOW	ELVAX 460	%VA: 18	ELVAX resins can be used in a variety of applications involving molding, compounding, extrusion, adhesives, sealants, and wax blends.
EVA	DOW	ELVAX CE9619-1	%VA: 18	This resin is designed to modify the surface properties of films or coatings of ELVAX Resins or other compatible polymers.
EVA	DOW	ELVAX 40L-03	%VA: 40	ELVAX resins can be used in a variety of applications involving molding, compounding, extrusion, adhesives, sealants, and wax blends.
EVA	DOW	ELVAX 40L-03	%VA: 40	ELVAX resins can be used in a variety of applications involving molding, compounding, extrusion, adhesives, sealants, and wax blends.

Generated by wpDataTables

TRA CỨU NHANH

Full grade

Hotline

(+84) 888097576

TRA CỨU NHANH

Full grade

Hotline

(+84) 888097576

Đăng nhập